dball2pro / 5x10 no ground when armed?

Home / the12volt's Install Bay / Car Security and Convenience / dball2pro / 5x10 no ground when armed? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

u1cracka

Member - Posts: 6

Joined: January 15, 2015

Location: Hawaii, United States

Posted: January 16, 2015 at 10:01 PM / IP Logged

Hey kingvinnie I seen a pic of the Led/valet switch that comes with the kit and there are only 3 separate wires coming out of it blue/GREEN/ red with there own little pigtails I guess you can call it.

How does this plug into the green 6pin port on the brain.

Also thanks for helping me out.

Back to Top

KingVinnie

Member - Posts: 39

Joined: March 09, 2003

Location: United States

Posted: January 17, 2015 at 8:28 AM / IP Logged

it comes with the green molex connector piece too. They leave it separate so the wire will fit thru the hole your drill for the switch.

KingVinnie

Back to Top

u1cracka

Member - Posts: 6

Joined: January 15, 2015

Location: Hawaii, United States

Posted: January 17, 2015 at 11:43 AM / IP Logged

KingVinnie wrote:

it comes with the green molex connector piece too. They leave it separate so the wire will fit thru the hole your drill for the switch.

Ok I see I got a green 6pin antenna cable that came with a VIPER SMART KEY DSK100 I'm thinking of splicing into that witty a alarm Led (blue and red wire one)

Would you happen to know which slots or the order the blue and wires go in.

I want to match them to the one I have to make sure they are right.

Back to Top

u1cracka

Member - Posts: 6

Joined: January 15, 2015

Location: Hawaii, United States

Posted: January 17, 2015 at 2:10 PM / IP Logged

I just tried hooking up the blue and red wires to the blue and red wires on the green 6pin wires and the led lights up even when the alarm disarmed or armed and it doesn't blink.

Back to Top

KingVinnie

Member - Posts: 39

Joined: March 09, 2003

Location: United States

Posted: January 17, 2015 at 9:13 PM / IP Logged

dball2pro / 5x10 no ground when armed? - Page 2 -- posted image.

KingVinnie

Back to Top

u1cracka

Member - Posts: 6

Joined: January 15, 2015

Location: Hawaii, United States

Posted: January 18, 2015 at 12:48 AM / IP Logged

KingVinnie wrote:

Thanks kingvinnie I got it to work using that pic you posted.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dball2pro / 5x10 no ground when armed?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.