no heat during remote start

Home / the12volt's Install Bay / Car Security and Convenience / no heat during remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

durf23112

Member - Posts: 21

Joined: December 28, 2014

Location: Virginia, United States

Posted: January 04, 2015 at 4:25 PM / IP Logged

quick update: if I connect the H3-6 to ignition 2 wire the heat comes on. So you guys were right. HOWEVER, still got a question. This wire is called the OUTPUT fro the flex relay +. It has 12 volts on it all the time EXCEPT when starter triggered. After start this wire will have 12 volts even when key is inserted. Does that concern anyone. Shouldn't this wire go to z3ero after key is inserted? Any help sorting this out would be appreciated.

jf durf

Back to Top

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: January 04, 2015 at 5:53 PM / IP Logged

its an ignition output so it will always stay hot. If its dropping out, it might be programmed as an accessory.

Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

Back to Top

durf23112

Member - Posts: 21

Joined: December 28, 2014

Location: Virginia, United States

Posted: January 05, 2015 at 5:47 PM / IP Logged

It can be programmed as either ignition 2 (default), accessory or starter output. I am just concerned that it is hot even after the key is inserted. I'm worried that after key goes in the original ignition 2 is hot and the output from the flex relay is hot so the current is 2xwhat it should be. Am I off base?

jf durf

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

no heat during remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.