the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2010 accord crosstour


Post ReplyPost New Topic
< Prev Topic Next Topic >
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: January 11, 2015 at 6:52 AM / IP Logged  
I will try today...if not I will hard wire the car and use the firmware for bypass only..Idata is not open for Tech support on weekends I guess..I will swap starter brains and the alca and see if there was a faulty module..and double check my connections on possible cold soldered joint...Other than that I am stumped
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: January 11, 2015 at 9:34 AM / IP Logged  
I am not getting ignition out of the ALCA..run a ignition to the switch on the same wire from the starter direct I get dash lights. but a flashing green key.. does do pit stop fine.. brake signal lock and unlock work fine...
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: January 11, 2015 at 12:41 PM / IP Logged  
The idatalink doesnt supply an ignition. It only requires an ignition input
You still require power, ground, ign, acc, and start to the key switch. If you have a flashing green key, your bypass isnt turning on before ignition goes on.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
ziggyb222 
Silver - Posts: 593
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: January 04, 2004
Location: Maine, United States
Posted: January 11, 2015 at 9:18 PM / IP Logged  
I had figured that out and everything works great...only about my tenth Idata module I have used...glad I tried them and Fortin...thanks for the help!!!!!
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer