the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2007 Peugeot 308 Lock Trigger


Post ReplyPost New Topic
< Prev Topic Next Topic >
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 10, 2016 at 9:20 AM / IP Logged  
Don't worry that's OK thanks all the best!
tafarelli 
Copper - Posts: 55
Copper spacespace
Joined: January 06, 2016
Location: Croatia
Posted: January 10, 2016 at 9:35 AM / IP Logged  
You too!
dk
tafarelli 
Copper - Posts: 55
Copper spacespace
Joined: January 06, 2016
Location: Croatia
Posted: January 11, 2016 at 3:46 PM / IP Logged  
It seems that I should delay lock trigger signal for few miliseconds. The lock/unlock thing happened to me once in this two days (like once in a hundred or so). Maybe I can use a capacitor for it. I am not that skilled in electronics so I ask for your advice. Thanks
dk
tafarelli 
Copper - Posts: 55
Copper spacespace
Joined: January 06, 2016
Location: Croatia
Posted: January 11, 2016 at 3:53 PM / IP Logged  
Or maybe just couple of meters of cable?
dk
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: January 11, 2016 at 8:16 PM / IP Logged  
A diode and an electrolytic cap should do the trick.
tafarelli 
Copper - Posts: 55
Copper spacespace
Joined: January 06, 2016
Location: Croatia
Posted: January 12, 2016 at 3:12 AM / IP Logged  
Tx
howie ll 
Pot Metal - Posts: 16,466
Pot Metal spacespace
Joined: January 09, 2007
Location: United Kingdom
Posted: January 12, 2016 at 4:19 AM / IP Logged  
Can you change lock time on your unit?
It's actually a Peugeot fault because of bad build quality, one of the actuator micro switches is out of alignment.
tafarelli 
Copper - Posts: 55
Copper spacespace
Joined: January 06, 2016
Location: Croatia
Posted: January 12, 2016 at 5:31 AM / IP Logged  
No I can't I will replace relay on lock trigger with time delayed one. Tx
dk
tafarelli 
Copper - Posts: 55
Copper spacespace
Joined: January 06, 2016
Location: Croatia
Posted: January 13, 2016 at 3:02 PM / IP Logged  
The installation is complete. If anyone need any help with Peugeot 308 pke they can contact me here. ✌
dk
g4m8l3r 
Member - Posts: 9
Member spacespace
Joined: July 03, 2016
Location: United Kingdom
Posted: July 03, 2016 at 9:20 AM / IP Logged  
Hi Tarafelli,
I am installing a pke system myself, iv got the remote/button start installed I just need to sort the central locking, any advice would be greatly appreciated
Page of 10

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 2, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer