2008 Prius PTS

Home / the12volt's Install Bay / Car Security and Convenience / 2008 Prius PTS

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: February 18, 2016 at 6:54 PM / IP Logged

Hello everyone, i have a 2008 Prius to do a remote start on, i'll be using the ALCA the install does not look to difficult however my question is Idatalink said to use two relays and 5 diodes to do the doorlocks ,i looked up the specs and it says the lock an unlock are straight negative trigger or are they something different ? Has anyone done this car and can explain what Idatalink is refering too?

triniforever

Back to Top

Mark Mizenko

Copper - Posts: 460

Joined: October 13, 2004

Location: Pennsylvania, United States

Posted: February 18, 2016 at 10:13 PM / IP Logged

You'll need 2 relays and 3 diodes to do the remote start. Then you'll want to do unlock with your remote start fob, cause the oem won't work during RS. You'll need 2 more diodes for the unlock part of the install. Hence the 2 relays 1 for brake, 1 for the keyport, and the 5 diodes. Just follow the diagram, very simple install. Just did one today, the top part above/around the wheel comes off, lots of room there.

Back to Top

triniforever

Copper - Posts: 323

Joined: November 12, 2008

Location: New York, United States

Posted: February 18, 2016 at 10:45 PM / IP Logged

Thanks very much Mark .

triniforever

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.