the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2005 Honda Odyssey, Door Trigger?


Post ReplyPost New Topic
< Prev Topic Next Topic >
kulblue 
Copper - Posts: 74
Copper spacespace
Joined: December 05, 2015
Posted: March 19, 2016 at 12:47 AM / IP Logged Link to Post Post Reply Quote kulblue
Hi,
The alarm system -neg door trigger can connect to dome light? Instead doing individual door trigger? For Honda Odyssey 2005. Thanks
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: March 19, 2016 at 6:39 AM / IP Logged Link to Post Post Reply Quote syl20rochon
Are you doing an alarm only or alarm/remote starter? It is best to connect door pin trigger input to door pins at all times. On your Honda, you'll have to use 4 wires (FL, FR, RL, RR) isolating with diodes. If you're doing an alarm only, you can use the domelight connection but it can result in false alarm triggers.
Diodes
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
kulblue 
Copper - Posts: 74
Copper spacespace
Joined: December 05, 2015
Posted: March 19, 2016 at 2:10 PM / IP Logged Link to Post Post Reply Quote kulblue
I'm doing remote start and alarm... I have hard time to find all trigger on the fuse box.
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: March 19, 2016 at 2:15 PM / IP Logged Link to Post Post Reply Quote syl20rochon
Notes
The individual door trigger wires are at the rear of the driver fuse/relay box in the driver kick. The LF door is green in a 16 pin plug, pin 15. The RF door is lt. GREEN/ red in a 14 pin plug, pin 12. The LR door is GREEN/ YELLOW in a 16 pin plug, pin 14. The RR door is GREEN / WHITE in a 14 pin plug, pin 13. Use all four wires and diode isolate each.
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: March 19, 2016 at 2:20 PM / IP Logged Link to Post Post Reply Quote syl20rochon
I don't know what bypass module you're using but you can use the DBALL2 from Directed, you won't have to wire door pins since they'll be supplied by the CAN bus network thru the module.
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
syl20rochon 
Copper - Posts: 298
Copper spacespace
Joined: October 16, 2009
Location: Ontario, Canada
Posted: March 19, 2016 at 2:25 PM / IP Logged Link to Post Post Reply Quote syl20rochon
Detailed Function List
W2W
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
DL-Sliding Door Control Driver
DL-Sliding Door Control Passenger
DL-Trunk / Hatch Release
PK-Immobilizer Bypass-Data No Key Req'd
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Hood Pin
SS-Entry Monitoring Trunk/Hatch Pin
ST-Brake Status (foot brake)
ST-E-Brake Status
D2D
DL-Arm Factory Security
DL-Disarm Factory Security
DL-Door Lock Control
DL-Door Unlock
DL-Driver Priority Unlock
DL-Sliding Door Control Driver
DL-Sliding Door Control Passenger
DL-Trunk / Hatch Release
FOB-Control of aftermarket alarm with OEM remote
PK-Immobilizer Bypass-Data No Key Req'd
RS-Tach / RPM Output
SS-Entry Monitoring ALL Door Pins
SS-Entry Monitoring Driver Door Pin
SS-Entry Monitoring Hood Pin
SS-Entry Monitoring Trunk/Hatch Pin
ST-Brake Status (foot brake)
ST-E-Brake Status
Sylvain Rochon
MECP security specialist
Tech support for remote starters
26 Years of experience counts
I'm here to help.
kulblue 
Copper - Posts: 74
Copper spacespace
Joined: December 05, 2015
Posted: March 20, 2016 at 12:35 AM / IP Logged Link to Post Post Reply Quote kulblue
Thanks for help and info. I tried to find all doors trigger on fuse Box but no luck. I check the black loom in the driver side panel, I found all doors trigger 2005 Honda Odyssey, Door Trigger? -- posted image.. Now I need to find and run extra wire for the trunk/hatch pin trigger.
I had the dball and avital installed and now I installed Cardot alarm remote start, push to start and pke. I used DEI universal interface bypass.

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, January 20, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer