the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 Hummer H3 directed remote start relay


Post ReplyPost New Topic
< Prev Topic Next Topic >
kaczman 
Member - Posts: 4
Member spacespace
Joined: September 30, 2011
Location: Ohio, United States
Posted: February 13, 2017 at 10:27 AM / IP Logged Link to Post Post Reply Quote kaczman
Hi all,
Im doing the remote start on my 06 H3 and I am stumped on this final wire.
Where in the world does the wire circled actually go to? it says Ignition of car or remote start unit.. but there's like 3. and if I run it to ignition of car, its just like bypassing the relay isnt it?
2006 Hummer H3 directed remote start relay -- posted image.
Any help would be appreciated.
kreg357 
Platinum - Posts: 7,632
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: February 13, 2017 at 11:00 AM / IP Logged Link to Post Post Reply Quote kreg357
It goes to the H3's Ignition wire, which is WHITE/ Green. It could also go the the R/S's thick Ignition 1 output wire,
which connects to the H3's WHITE/ Green Ignition 1 wire.   Photo below :
2006 Hummer H3 directed remote start relay -- posted image.
The relay won't be on all the time because it is also controlled by the R/S's (-) Status Output wire ( aka GWR ).
Soldering is fun!
kaczman 
Member - Posts: 4
Member spacespace
Joined: September 30, 2011
Location: Ohio, United States
Posted: February 13, 2017 at 11:57 AM / IP Logged Link to Post Post Reply Quote kaczman
wow, that was the most helpful response I've ever gotten on a message board in my 30+ years of life.
Thank you so much kreg357. That was exactly what I needed.
kaczman 
Member - Posts: 4
Member spacespace
Joined: September 30, 2011
Location: Ohio, United States
Posted: February 15, 2017 at 11:56 AM / IP Logged Link to Post Post Reply Quote kaczman
kreg357 wrote:
It goes to the H3's Ignition wire, which is WHITE/ Green. It could also go the the R/S's thick Ignition 1 output wire,
which connects to the H3's WHITE/ Green Ignition 1 wire.   Photo below :
2006 Hummer H3 directed remote start relay -- posted image.
The relay won't be on all the time because it is also controlled by the R/S's (-) Status Output wire ( aka GWR ).
Thanks again for your help. One more thing.
When I click lock on the viper remote, it locks all the doors. But the unlock on the remote doesn't do anything lock wise, but I hear the alarm disarm.
What did I do wrong?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, December 3, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer