Python 4806P w/ DBALL2 Module Programming Issue

Home / the12volt's Install Bay / Car Security and Convenience / Python 4806P w/ DBALL2 Module Programming Issue

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

beegbie

Copper - Posts: 341

Joined: August 17, 2002

Location: United States

Posted: September 13, 2017 at 7:53 PM / IP Logged

2nd starter wire is needed on many older Nissans but not on this one. If you look at a factory diagram for the 2014 x-terra, the second starter wire in the ignition harness doesn't actually do anything. It doesn't connect to anything in the car.

Back to Top

abethebue

Member - Posts: 26

Joined: July 22, 2010

Location: California, United States

Posted: September 21, 2017 at 12:41 AM / IP Logged

You need to connect the red white heavy gauge power cable to a 12v souce i didnt see that wire in your ignition harness wiring and if the parking lights are flashing after you activate the remote start that is normal it means the remote start is on if connecting the red white wire doesn't work make sure you have power on your red black heavy gauge 12v +

abethebue

Back to Top

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.