viper 4916v remote start

Home / the12volt's Install Bay / Car Security and Convenience / viper 4916v remote start

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

geepherder

Platinum - Posts: 3,668

This member consistently provides reliable information

Joined: October 27, 2003

Posted: November 13, 2017 at 5:46 PM / IP Logged

Which wire from the remote start do you have connected to which wire in the vehicle for your starter connection? Have you tested these for proper voltage when you try to remote start?

My ex once told me I have a perfect face for radio.

munsie

Member - Posts: 10

Joined: November 11, 2017

Location: Michigan, United States

Posted: November 13, 2017 at 6:06 PM / IP Logged

I connected the violet wire to my truck for the starter when initiating remote start there is no voltage coming out of the box to my truck if I send power to it it does crank over and start

just another day

tdbaker021

Copper - Posts: 98

Joined: November 27, 2016

Location: Tennessee, United States

Posted: November 13, 2017 at 7:12 PM / IP Logged

munsie wrote:

I connected the violet wire to my truck for the starter when initiating remote start there is no voltage coming out of the box to my truck if I send power to it it does crank over and start

Did you ground the neutral safety wire?

munsie

Member - Posts: 10

Joined: November 11, 2017

Location: Michigan, United States

Posted: November 14, 2017 at 5:13 AM / IP Logged

Do not see a neutral safety wire

just another day

geepherder

Platinum - Posts: 3,668

Joined: October 27, 2003

Posted: November 14, 2017 at 8:20 AM / IP Logged

Good call, tdbaker021.

http://www.directeddealers.com/manuals/IG/Viper/N4X06%202015-12%20web.pdf

It maybe labelled as a parking brake wire, but it needs to be grounded. Black/white pin 13 of the 24 pin harness.

My ex once told me I have a perfect face for radio.

munsie

Member - Posts: 10

Joined: November 11, 2017

Location: Michigan, United States

Posted: November 14, 2017 at 8:31 AM / IP Logged

The black and white for parking brake is grounded

just another day

geepherder

Platinum - Posts: 3,668

Joined: October 27, 2003

Posted: November 14, 2017 at 5:42 PM / IP Logged

Then it's likely the unit's no good. Being as such, there is no warranty, as you're installing it yourself. It wouldn't hurt to open it up and look for something obvious.

My ex once told me I have a perfect face for radio.

munsie

Member - Posts: 10

Joined: November 11, 2017

Location: Michigan, United States

Posted: November 15, 2017 at 8:26 AM / IP Logged

Well good news is I got it to work had to change the crank time and use the flex relay setup. Also the ground I had for the parking brake was not good hooked it to the ground for the unit and works awesome now just need to change my run time. Thanks for the help!!

just another day

< Prev Page

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.