2010 F250 6.4l Remote Start
Welcome Guest :)
dunn0321
Member -
Posts: 10
Joined: June 29, 2018
Location: Tennessee, United States
Posted: June 29, 2018 at 9:48 PM / IP Logged
I have installed an avital 5305l with EVO-ALL I am using d2d but can't get the truck to remote start. It will unlock and lock but won't start. What am I missing?
Josh Dunn
cpalmer
Copper -
Posts: 109
Joined: March 18, 2007
Location: United States
Posted: June 30, 2018 at 9:41 PM / IP Logged
Do the parking lights flash when you attempt to remote start?
dunn0321
Member -
Posts: 10
Joined: June 29, 2018
Location: Tennessee, United States
Posted: June 30, 2018 at 9:42 PM / IP Logged
No they don't only when you lock and unlock it?
Josh Dunn
chev104275
Gold -
Posts: 1,424
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: July 01, 2018 at 7:22 AM / IP Logged
Where do you have the black/white netural saftey wire connected ? Is there a valet switch ?
If i Can't Install it I Don't need it Joe
dunn0321
Member -
Posts: 10
Joined: June 29, 2018
Location: Tennessee, United States
Posted: July 01, 2018 at 11:32 AM / IP Logged
Is it a solid white or black or is it a white and black wire
Josh Dunn
dunn0321
Member -
Posts: 10
Joined: June 29, 2018
Location: Tennessee, United States
Posted: July 01, 2018 at 11:35 AM / IP Logged
There is not a valet switch
Josh Dunn
dunn0321
Member -
Posts: 10
Joined: June 29, 2018
Location: Tennessee, United States
Posted: July 01, 2018 at 2:05 PM / IP Logged
Looking on the Evo all and the avital 5305l there is not a safety netural wire. I have hooked it up according to the Evo all manual
Josh Dunn
chev104275
Gold -
Posts: 1,424
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: July 01, 2018 at 7:51 PM / IP Logged
Pin 13 of the 24 pin connector black with a white strip. Where is that wire going ?
If i Can't Install it I Don't need it Joe
dunn0321
Member -
Posts: 10
Joined: June 29, 2018
Location: Tennessee, United States
Posted: July 01, 2018 at 7:59 PM / IP Logged
That one isn't going anywhere
Josh Dunn
chev104275
Gold -
Posts: 1,424
Joined: November 26, 2007
Location: Massachusetts, United States
Posted: July 01, 2018 at 8:37 PM / IP Logged
It needs to see ground for the remote start to work. I'm assuming your truck is an automatic. You can ground the wire through a switch or straight to ground
If i Can't Install it I Don't need it Joe
Follow the12volt.com
Friday, April 19, 2024
• Copyright © 1999-2024 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
Members
Search
Register
Login
Printable version
