the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

BMW E30 - Viper 4203v Remote Start Install


Post ReplyPost New Topic
< Prev Topic Next Topic >
paul-z 
Member - Posts: 2
Member spacespace
Joined: October 03, 2018
Posted: October 03, 2018 at 11:16 AM / IP Logged Link to Post Post Reply Quote paul-z
Hey guys,
Looking for some assistance here. I have this unit wired up and am getting the following symptoms:
- Upon long button press, I'm getting multiple beeps and a green light on my remote
- I hear a click in the main unit and see a temporary spike in voltage on my accessory wire
- I get no ignition/crank, followed by 4 double-beeps on the remote
Using a voltmeter, I've narrowed my car-side wiring to the following:
Red - 12v constant
Violet - see's 12v when key in accessory position
Green - see's 12v when key in ignition position
Green/Grey - also see's 12v when key in ignition position - apparently this is the rear defogger
Black - Starter
Viper wiring states the following:
Red - 12v constant
Pink - Output to ignition
Purple - Output to starter
Orange - Output to accessory
Red - 12v constant
Pink/White - Programmable output for accessory or ignition
My wiring:
- Red from car tied into BOTH Red's on Viper
- Violet from car tied into Orange on Viper
- Green from car tied into Pink on Viper
- Black from car tied into Purple on Viper
- Green/Violet from car not used
- Pink/White from viper not used
Any help would be greatly appreciated!
cpalmer 
Copper - Posts: 109
Copper spacespace
Joined: March 18, 2007
Location: United States
Posted: October 03, 2018 at 9:37 PM / IP Logged Link to Post Post Reply Quote cpalmer
Have you programmed tach signal?
paul-z 
Member - Posts: 2
Member spacespace
Joined: October 03, 2018
Posted: October 04, 2018 at 12:30 PM / IP Logged Link to Post Post Reply Quote paul-z
I believe I did the tach learning correctly, but will attempt it again tonight and see if that works.
I know my car has an ignition advance relay under the hood. When I use the key, I hear this relay click. When using the remote start it doesn't.
I'm wondering if this has something to do with my problem?

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer