the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

I Only Want to Connect/Use Keyless Entry/Exit


Post ReplyPost New Topic
< Prev Topic Next Topic >
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: March 07, 2019 at 3:56 AM / IP Logged Link to Post Post Reply Quote geepherder
Do you have the orange and orange/black to ground, and yellow and yellow/black to constant 12 volts?
Is the red connected to constant 12 volts and the black to ground?
The brown wire is your positive parking light output.
My ex once told me I have a perfect face for radio.
horacecain 
Member - Posts: 6
Member spacespace
Joined: February 21, 2019
Location: Texas, United States
Posted: March 08, 2019 at 7:55 AM / IP Logged Link to Post Post Reply Quote horacecain
Geep,
I am bench testing the unit in doors.
I am using a 12v DC power supply.
When I connect the wiring, I hear the hear unit click. The indicator light supplied stays solid blue.
Nothing happens when I press the remote buttons of the fob. The actuator is connected from the white, white/black to the blue and green wore on actuator.
Perhaps I need to be explained this wiring like I am a baby!
Thank you for your time.
mr
geepherder 
Platinum - Posts: 3,668
Platinum spaceThis member consistently provides reliable informationspace
Joined: October 27, 2003
Posted: March 08, 2019 at 2:24 PM / IP Logged Link to Post Post Reply Quote geepherder
I honestly can't tell if you are being serious or joking. I meant no offense.
Have you checked for instructions on how to program a remote? It's possible it was lost from programming. If not, contact customer support or the seller.
My ex once told me I have a perfect face for radio.
i am an idiot 
Platinum - Posts: 13,666
Platinum spaceThis member consistently provides reliable informationspace
Joined: September 21, 2006
Location: Louisiana, United States
Posted: March 08, 2019 at 4:41 PM / IP Logged Link to Post Post Reply Quote i am an idiot
In figure 2, what did you connect to the yellow and the yellow/black wires?
What did you connect to the Orange and Orange/Black wires?
Page of 2

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer