Viper 3105V, Bypassing Control Center Antenna LED?

Home / the12volt's Install Bay / Car Security and Convenience / Viper 3105V, Bypassing Control Center Antenna LED?

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

joseph58

Member - Posts: 8

Joined: October 10, 2009

Posted: August 12, 2021 at 1:20 PM / IP Logged

Hello,

I want to bypass/disable the 'all-in-one module' LED, wiring a separate LED directly to the dash.

- Viper alarm LED (red + blue)

- Antenna/valet switch/LED all-in-one module (gray+blue+black+red+green+pink)

Could not find any intermittent current on any of the 6 wires when alarm was activated.

Red wire on the all-in-one module has constant 5v.

Any help would be appreciated!

Viper 350 Plus (Model 3105V)

Back to Top

t&t tech

Platinum - Posts: 2,608

Joined: October 05, 2008

Location: Trinidad and Tobago

Posted: August 23, 2021 at 8:22 PM / IP Logged

Just go directly to the control module. Unplug the led plug from the port and you can plug an in dash led directly to the module, P.S you can get an original viper led from any alarm shop in your area, they come in red and blue.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.