Viper 5706V With Omegalink Bypass Module, 2007 Nissan Titan

Could I hardwire all required wires with the exception of the RS 24-pin green/black factory alarm disarm output and green/white factory alarm arm output wires until I get the pigtails and still program the RS/alarm to function properly? If this will still work without connecting these two wires do I need to reprogram the RS/alarm once I do get it connected? I will also be looking at connecting these wires to the power door lock/unlock as shown on the wiring diagram for my Titan. It shows on Note #3 that the power lock (blue) wire will arm the factory alarm and Note #4 shows that the power door unlock (red) wire will disarm the factory alarm. If this works then I won't need to connect to the BCM pin 7 & 8 harness connector M18. Is this correct?desertislandertech

I couldn't tell you how it would work with the Omegalink as I've never used them. But yes, if the wires at the power window switch work, you wouldn't need any pigtails.