the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

96 Civic Alarm install questions...


Post ReplyPost New Topic
< Prev Topic Next Topic >
padawan 
Copper - Posts: 215
Copper spacespace
Joined: June 11, 2002
Location: United States
Posted: June 18, 2003 at 11:12 PM / IP Logged  
Thanx good stuff, thanx guys.
padawan 
Copper - Posts: 215
Copper spacespace
Joined: June 11, 2002
Location: United States
Posted: June 19, 2003 at 12:23 PM / IP Logged  
Successful install.
I would up placing the override switch behind the hood latch release as someone suggested, thanx, great spot.
I put the LED on top the steering column as someone else suggested, nice and visible, thanx.
I ran the siren wire through a grommet on the drivers side where a loom of wires from the fuse block goes to.
Grounded alarm to ground in kick panel...
Mounted brain to wire harnesses under dash with wire ties...
Starter kill relay got hooks up to cut starter wire with yellow butt connectors, it worked this time, easy.
Door trigger was in fact, Light Green with Red tracer...I did test it with my meter, got +12V on door shut, ground when open, so I knew it was the right wire.
Siren mounted on driver's side behing windshield wiper fluid resevoir using 1 screw and wire ties...
Antenna for brain wasn't long enough so I just ran it up the dash as vertical as possible...
Thanx guys, now on to my 90 Legend...same alarm.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, January 20, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer