the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

remote start on manual trans.


Post ReplyPost New Topic
< Prev Topic Next Topic >
Focusedonsound 
Copper - Posts: 95
Copper spacespace
Joined: June 13, 2003
Location: United States
Posted: December 22, 2003 at 2:16 PM / IP Logged  

Crudeau,

I believe that they are refering to retro fitting a regular remote start made for a automatic trans mission to work in a manual trans car.

I don't know that its illegal however like everyone above has said it is risky. 

Atleaset with the models that are made for a manual trans they have some preventive steps... if you do some searching on this board about manual transmissions .. you will find out...

crudeau 
Copper - Posts: 150
Copper spacespace
Joined: August 25, 2003
Location: United States
Posted: December 22, 2003 at 2:58 PM / IP Logged  
I have 2 viper 550ESP and a Viper 790CX (or vx one of them).    All I had to do was wire a relay up to the clutch swich and the negative output of the remote start.    I tested it in gear and after 3 attempts at starting it moves the car about 1.5' with the parking brake on.  I never leave the car in gear and don't park on hills so I haven't had an issue yet.  Some day someone will invent a Netural saftey switch for manuals.  Till then, I am rebel with a remote start! remote start on manual trans. - Page 2 - Last Post -- posted image.
joegreene58 
Member - Posts: 2
Member spacespace
Joined: December 18, 2003
Location: United States
Posted: December 22, 2003 at 8:31 PM / IP Logged  
I installed a DirectStart423 designed for manual. Its design is to put the vehicle in neutral,press the parking brake. activate the remote while the vehicle is running,remove the key,exit the vehicle and then kill the vehicle with the remote button.if the door is reopened it will not start.
crudeau 
Copper - Posts: 150
Copper spacespace
Joined: August 25, 2003
Location: United States
Posted: December 23, 2003 at 9:20 AM / IP Logged  
Sounds like some steps I would forget.  Someone should invent some kind of unversal ring with some switches in it.  Fits around the shifter and if not in neutral it grounds out.  This could be used as a neutral saftey switch. 
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: December 23, 2003 at 10:43 AM / IP Logged  
crudeau wrote:
Some day someone will invent a Netural saftey switch for manuals.remote start on manual trans. - Page 2 - Last Post -- posted image.
http://peripheralelectronics.com/2002/security_bypasses.asp
You ask and you shall recieve. It is called a NSS it is at the very bottom of the page.
Merry X-Mas
Regards
EVIL Teken . . .
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, April 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer