the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

92 civic alarm/starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
drd4life 
Member - Posts: 19
Member spacespace
Joined: May 10, 2003
Location: Canada
Posted: December 29, 2003 at 3:48 PM / IP Logged  
Hey everyone!  I am trying to install an alarm/starter, and small amp in my 92 civic.  My problem is I can't seem to fing the hole in the firewall to the engine to pass through various wires.  I found one on the passenger side footwell, but it seems sealed shut once I remove the rubber cover.  Is there another spot, or do I have to break out the drill??
Haku 
Copper - Posts: 204
Copper spacespace
Joined: November 22, 2002
Location: United States
Posted: December 29, 2003 at 6:01 PM / IP Logged  

Break out the old drill.  But make sure theres nothing your drilling into on the other side!! 

Hak
Siemens Autostart
sroth140 
Silver - Posts: 513
Silver spacespace
Joined: August 27, 2003
Location: United States
Posted: December 29, 2003 at 7:28 PM / IP Logged  
is it a 5 speed?  if not, there should be a clutch plate that is sorta oval shaped with two small holes on either side.  it should be a little way up the firewall and to the left of the break pedal (duh).  check the engine side and use a grommet.
black2nd12 
Member - Posts: 12
Member spacespace
Joined: August 06, 2003
Location: United States
Posted: December 29, 2003 at 11:41 PM / IP Logged  

or you could run the wire through the main engine grommet on the driver side firewal in the corner.

drd4life 
Member - Posts: 19
Member spacespace
Joined: May 10, 2003
Location: Canada
Posted: January 03, 2004 at 2:18 PM / IP Logged  
Thanks guys! It's an automatic, so I'll check that out!!
drd4life 
Member - Posts: 19
Member spacespace
Joined: May 10, 2003
Location: Canada
Posted: January 03, 2004 at 2:24 PM / IP Logged  
Thanks guys! Its an automatic, so I'll try it that way!!
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: January 03, 2004 at 5:36 PM / IP Logged  
Runner your power wire thru the factory grommet near the battery. Pop the grommet out and then feed something (really long zip tie or metal snake) into the car thru the hole and straight down. Pull back the carpet in the passenger footwell and you should see it.
drd4life 
Member - Posts: 19
Member spacespace
Joined: May 10, 2003
Location: Canada
Posted: January 12, 2004 at 4:10 PM / IP Logged  
do the hole near the battery and  the hole in the footwell line up straight, or on an angle, 'cause thats the hole I found, but it feels like solid metal, on either side.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer