door poppers

Home / the12volt's Install Bay / Car Security and Convenience / door poppers (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: December 29, 2003 at 4:13 PM / IP Logged

i just installed a 2 door popper kit on my chevy truck, and the "brain" it came with has an option to hook up parking lamps to it, so when the doors pop open, the lights flash. now, out of the "brain" there are 2 yellow wires that are labeled "parking lamps" do i need to use both of these wires, or can i use one for the parking lamps, and the other for something else, like LEDs or somthing?

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 29, 2003 at 5:26 PM / IP Logged

Are you sure one is not set for (+) and the other is

(-) trigger?

I would suggest that you take the time to read over the install manual to varify th exact function and its current draw capabilites.

If you require a relay, that would be very important to include, before you melt away the unit and all the hard work it took you to do this.

Just a thought

Regards

EVIL Teken . . .

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: December 30, 2003 at 1:26 AM / IP Logged

none of the wires are labeled as + or -. and it didnt come with an installation manual, just a wiring guide. thats all.

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 30, 2003 at 7:39 AM / IP Logged

Can you scan in the wiring diagram for us to see?

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: December 30, 2003 at 8:30 AM / IP Logged

Brand?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: December 30, 2003 at 10:27 PM / IP Logged

i dont have a scanner, this is all i could find about it online

http://www.aewel.com/Beta/Detail.asp?Product_ID=500.509_JW-R593

AudioBAHNvlcm

Copper - Posts: 209

Joined: February 19, 2003

Location: United States

Posted: December 30, 2003 at 11:39 PM / IP Logged

i tried to draw the diagram as best as i could.

door poppers -- posted image.

boomer_106

Silver - Posts: 710

Joined: November 25, 2003

Location: United States

Posted: December 31, 2003 at 1:26 AM / IP Logged

If it were me since there is a phone number there I would just call them and ask. I suspect as the others said that one is for pos and the other neg output.

carguy411

Silver - Posts: 683

Joined: April 02, 2002

Location: United States

Posted: December 31, 2003 at 2:01 PM / IP Logged

most likely it has 2 pos out puts because on some imports the left and right sides are seperate and when hooking them up u use 1 wire for each side.but i would just test them with a multimeter for sure but im almost positive thats why there are two of them

Teken

Gold - Posts: 1,492

Joined: August 04, 2002

Location: Aruba

Posted: December 31, 2003 at 4:09 PM / IP Logged

OFF TOPIC: The link you provided, doesnt really make much sense to me.

Why does it say at the bottom, TRADES ONLY? There are no actual prices listed / indicated for anything there?

Is this a type of swap & trade business? There wasnt much information to be gleaned from this site.

Regards

EVIL Teken . . .

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.