95 explorer, viper 791 xv

Home / the12volt's Install Bay / Car Security and Convenience / 95 explorer, viper 791 xv (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 24, 2004 at 11:44 PM / IP Logged

i have a few more questions about the wiring

for the factory disarm output is it neccesary to use a relay?

the alarm has a factory alarm rearm wire (GREEN / WHITE) but i haven't been able to find what wire to hook this into.

in the remote start secondary harness the blue/white (-) status output what does this connect to?

in the four pin connector that connects to the relay satellite: for blue (-) status output do i tie this into the blue/white (-) status output in the remote start secondary harness and what do i connect this to, the orange (-) 2nd accessory output and the purple (-) starter output, what do i connect these to? there is also a pink (-) 3rd igntion output that i need to know what to connect this to.

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 25, 2004 at 12:35 AM / IP Logged

Can anyone help me out with this

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: January 25, 2004 at 12:57 AM / IP Logged

for the factory disarm output is it neccesary to use a relay?

No need for a relay on this connection.

the alarm has a factory alarm rearm wire (GREEN / WHITE) but i haven't been able to find what wire to hook this into.

Arms on lock only with door open. It is necessary to send a signal to door trigger as well as lock to arm factory alarm.

in the remote start secondary harness the blue/white (-) status output what does this connect to?

This wire connects to modules for security bypasses or door lock interface modules. Anything that you may need to turn on when remote starting, but turn off when you insert the key into the ignition to take over the remote starter.

in the four pin connector that connects to the relay satellite: for blue (-) status output do i tie this into the blue/white (-) status output in the remote start secondary harness and what do i connect this to,the orange (-) 2nd accessory output and the purple (-) starter output, what do i connect these to? there is also a pink (-) 3rd igntion output that i need to know what to connect this to.

You do not connect any wires from the alarm back into any other harnesses on the alarm. Check the installation manual for descriptions of all these wires to help you install these wires.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 25, 2004 at 1:20 AM / IP Logged

there isn't a description of the wires on the four pin relay satellite. it just states what they are as in what i had listed. i am a beginner so any help would be greatly appreciated.

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 25, 2004 at 2:42 AM / IP Logged

can anyone tell me what to hook up to for the four pin pin relay satelite. i can not find anything in the instructional manual on them or i may just not be seeing it. please help

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 25, 2004 at 3:02 AM / IP Logged

can anyone not tell me how to hook up the wires please

wtcook8657

Member - Posts: 14

Joined: January 20, 2004

Location: United States

Posted: January 25, 2004 at 5:46 AM / IP Logged

is there anyone out there that can answere my questions

''PLEASE"

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

95 explorer, viper 791 xv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.