Out of Channels on Autopage 750

Home / the12volt's Install Bay / Car Security and Convenience / Out of Channels on Autopage 750 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

TrickDaddy

Member - Posts: 19

Joined: October 09, 2003

Location: United States

Posted: January 30, 2004 at 7:56 AM / IP Logged

I am venting/rolling my windows done using the Trunk Release button on my Autopage 750LCD. I am using two DEI 530Ts. I got the windows configured to roll up when I arm the alarm. With the alarm set, I can vent and roll down the windows, using my Trunk Release button. I want to be able to roll the window up by pressing the lock button on the alarm without disarming and rearming the alarm. The problem I'm running into is, it seems, that I dont get an output on the orange wire to roll the windows up when I press the lock button a second time after the initial arming. Any Ideas????

TrickDaddy

Back to Top

TrickDaddy

Member - Posts: 19

Joined: October 09, 2003

Location: United States

Posted: January 30, 2004 at 7:58 AM / IP Logged

I have tried the 450T Channel Expander, I cant use it because I have to hold my trunk release button for 2 seconds before I get an output. Believe me, I have tried, but if the output aint instant, the 450t just wont work.

Back to Top

druid1200mk2

Member - Posts: 2

Joined: November 04, 2003

Location: United States

Posted: February 11, 2004 at 6:04 PM / IP Logged

use a 12 volt garage door module which is an easy way to expand a channel , you can program the garage door module to activate with any button on the 750lcd. they cost around 30 bucks or so. they have a power ground and negative output...really installer friendly...hope that helps...jeromy

druid1200 (Jeromy)

Back to Top

druid1200mk2

Member - Posts: 2

Joined: November 04, 2003

Location: United States

Posted: February 11, 2004 at 6:04 PM / IP Logged

also you can program it to do a pulsed , lached, or momentary output. jeromy

druid1200 (Jeromy)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Out of Channels on Autopage 750

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.