alarm not in command?

Home / the12volt's Install Bay / Car Security and Convenience / alarm not in command? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: February 14, 2004 at 11:35 AM / IP Logged

ok i'll try that thanx

today i'm going to head out to the same place were i got it installed and ask them. i still have the reciept so yeah thanx alot whitey. i'll try that again

let say it dont' work . do i have to wait several minutes before i do it again?

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: February 14, 2004 at 2:55 PM / IP Logged

whitey wrote:

When the 650 is in valet mode after 1 hour the led will go from solid to off. It is power save mode. Like JWorm said

.....to exit valet mode open the door and press lock, unlock , lock. Then close the door and see if you get your chirps and led flashing back.

Try that

yeah i just got back from a 45 min drive,

they guy that installed it showed me what to do, it is what u guys have told me.

cuz the way i was doing it was i would pause. were, he showed me i did it rapidly with out pause.

so yeah thanx guys now its chirriping like old fashion. thanx alot. i wasted $50 today to just going there

$10 on gas, $30 on Valentines gift in garden grove, $10 on lunch

god damn wtf is up and i only make $100 per week

kill me y dont you lolz

thanx again mwa take cares

HAPPY VALENTINES DAY!

Back to Top

BangBang

Silver - Posts: 287

Joined: October 25, 2003

Location: United States

Posted: February 15, 2004 at 12:31 PM / IP Logged

yea my alarm is working but now my amp and radio is not working. so are my subs lolz ahhhah help me plz?

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

alarm not in command?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.