Undercar Neon

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Undercar Neon (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Raganoo

Member - Posts: 3

Joined: February 23, 2004

Location: Canada

Posted: February 23, 2004 at 10:53 PM / IP Logged

Im havin trouble with my install, 1/2 of one side tube and the rear tube wont fire up, but the front and one side are REALLY bright.. Are the insulators a must, and should i twist the wire together instead of just crimping it, or do i have a couple bad tubes?

Back to Top

Tight_dbz

Member - Posts: 21

Joined: February 23, 2004

Location: United States

Posted: February 24, 2004 at 2:52 PM / IP Logged

Installation is usually the main factor in a products performance. I would suggest to go all out on the installation and if you still have problems then call the service department. I suggest to twist the wires, solder and use heat shrink tubing for a secure and tight connection.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Undercar Neon

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.