keyless entry ranger

Home / the12volt's Install Bay / Car Security and Convenience / keyless entry ranger (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

wepa

Member - Posts: 12

Joined: July 14, 2003

Posted: March 19, 2004 at 11:36 AM / IP Logged

also my alarm manual says that the alarm send a ground pulse for unlocking and locking doors

wepa

Member - Posts: 12

Joined: July 14, 2003

Posted: March 19, 2004 at 12:46 PM / IP Logged

hello? anyone?

also the pink light green cable dosen't unlock the doo

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 19, 2004 at 2:36 PM / IP Logged

Power Lock PINK / YELLOW DRIVER KICK #201

Power Unlock PINK/L GREEN PANEL

#201- See Negative Pulse Door Lock Diagram.

if you hooked up the door locks straight to the alarm and they worked, then that is fine. that means that you have a -ve output for your door locks and thats what you need...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

wepa

Member - Posts: 12

Joined: July 14, 2003

Posted: March 19, 2004 at 3:14 PM / IP Logged

great thanks :)

now another question (sorry ) is the acessory wire necessary? because its causing my doors to lock/unlock when I turn on and turn off my ranger, I removed the acessorie wire and the problem stopped, and the rest of the alarm works fine.

and my last question and I wont bug anymore (I hope!)

where do i hook up the door input - and +

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 19, 2004 at 3:19 PM / IP Logged

yes you need it, it keeps the alarm from arming while you are driving down the road....you can change that feature...look the owners manual and it should tell you...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

wepa

Member - Posts: 12

Joined: July 14, 2003

Posted: March 19, 2004 at 3:44 PM / IP Logged

cool I just did thanks

do you happen to know the color of the wire were I need to connect the door trigger and where is it?

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 19, 2004 at 4:09 PM / IP Logged

Dome Light BLACK/ L BLUE (+) 84 PIN CONNECTOR BEHIND DRIVER DASH

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

wepa

Member - Posts: 12

Joined: July 14, 2003

Posted: March 20, 2004 at 12:33 PM / IP Logged

hey thanks for all the help, but can u be a little bit more specific, I ve been looking for that wire all over behind the drivers dash and I cant seem to find it

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: March 20, 2004 at 12:46 PM / IP Logged

you can check in the kick panels look for the spot where the wires come from the door into the truck...test the wire with your meter....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

keyless entry ranger

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.