the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

kenwood touch screen


Post ReplyPost New Topic
< Prev Topic Next Topic >
wickedvision 
Member - Posts: 9
Member spacespace
Joined: February 05, 2004
Location: United States
Posted: April 12, 2004 at 9:48 AM / IP Logged  

does anyone know if any of the kenwood stand alone monitors such as the lz-801w are capable of being used to control the kvt-911dvd instead of or in addition to the built in screen. what i would like to do is flush mount the screen in the dash so it will be built in and wont flip out any more .

n.sputnik 
Member - Posts: 8
Member spacespace
Joined: April 19, 2004
Location: United States
Posted: April 19, 2004 at 6:43 PM / IP Logged  
I hear there is someone out there that is making such a cable.  They do use the same pin configuration for the monitor, but this is a connector on the inside of the units.  I'll ask the person who mentioned this to me and get back with you.
wickedvision 
Member - Posts: 9
Member spacespace
Joined: February 05, 2004
Location: United States
Posted: April 23, 2004 at 5:51 AM / IP Logged  
thanks for the reply i've been trying to find a way to extend the cable for the built in screen but i have had no luck . I know that it can be done because i have seen it in photos many times . so far you are the only person to confirm that somone acctually makes the cable . If you find out who makes it I would greatly appreciate it .kenwood touch screen -- posted image.
Dragorus 
Copper - Posts: 75
Copper spacespace
Joined: January 12, 2004
Location: United States
Posted: April 24, 2004 at 11:52 AM / IP Logged  
Please post the info for this cable ASAP..Thanx
n.sputnik 
Member - Posts: 8
Member spacespace
Joined: April 19, 2004
Location: United States
Posted: April 27, 2004 at 11:38 AM / IP Logged  

In this picture, it looks like the KVT-911DVD screen has been detached from the main section.  This is not a LZ-800W monitor.  It is much wider thank this, and it appears there is no access to the numerous buttons that are along the bottom of the LZ-800W.

alpineinstaller 
Member - Posts: 6
Member spacespace
Joined: April 28, 2004
Location: United States
Posted: April 28, 2004 at 10:07 PM / IP Logged  
kenwood has a new double din dvd player
wickedvision 
Member - Posts: 9
Member spacespace
Joined: February 05, 2004
Location: United States
Posted: April 29, 2004 at 4:16 AM / IP Logged  

I know the screen in the picture is a detached 911 screen , I should have phrased my question better . I want to either get a lz801w monitor to work or seperate and flush mount the 911 screen in the dash . the reason I want to do this with the 911 is that it is a more advanced unit with alot more features than the new double din unit .


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, December 3, 2021 • Copyright © 1999-2021 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer