2003 dodge ram with viper 791

Home / the12volt's Install Bay / Car Security and Convenience / 2003 dodge ram with viper 791 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

osokrayzay

Copper - Posts: 54

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 01, 2004

Location: United States

Posted: April 22, 2004 at 2:44 PM / IP Logged

I just cant see it. Can someone pls explaing this to me PWR DOOR LOCK/UNLOCK (Single Wire System) WHITE/ GREEN ( - )820 Ohm DRIVER KICK PANEL

UNLOCK ( - ) 330 Ohm DRIVER KICK PANEL.

If its a single wire system where do you place the diodes?

----(| || |)-------(| ||)------ like this argh. Pls help

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: April 22, 2004 at 2:50 PM / IP Logged

Two relays...and two diodes..

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

osokrayzay

Copper - Posts: 54

Joined: April 01, 2004

Location: United States

Posted: April 22, 2004 at 3:13 PM / IP Logged

thx for your reply and i hate to ask but would you happen to have an exmple diagram. I have dodge ram 2003 and im installing a viper 791.

Im currently searching all topics on dodge ram 1500.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 22, 2004 at 4:16 PM / IP Logged

85-lk/unlk

86-(+)12volt constant

30-ground

87-resistor inline w/ diode to the lk/unlk

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

bmf1000d

Silver - Posts: 345

Joined: September 30, 2003

Location: United States

Posted: April 22, 2004 at 6:41 PM / IP Logged

Dodge

Ram Pickup

2002-2004

Remote Starter Wiring Colors and Notes
Function	Vehicle Color	Location
Start:	YELLOW	IGNITION SWITCH HARNESS
Ignition #1:	BLUE (16 AWG)	IGNITION SWITCH HARNESS
Ignition #2:	RED	IGNITION SWITCH HARNESS
Ignition #3:	GREEN & ORANGE (2 WIRES)	IGNITION SWITCH HARNESS
Accessory:	BLACK/ WHITE & BLUE (2 WIRES)	IGNITION SWITCH HARNESS
Brake Light:	WHITE/ TAN	AT SWITCH ABOVE BRAKE PEDAL
Tach Signal:	TAN/RED	AT IGNITION COIL
Parking Lights:	PURPLE / YELLOW	HEADLIGHT SWITCH*
Headlights:	PURPLE / YELLOW	HEADLIGHT SWITCH *
OEM Alarm Disarm:	LT. GREEN/ ORANGE *****	HARNESS COMING IN FROM DRIVER'S DOOR
OEM Alarm Arm:
Diesel Glow Plug:	ORANGE / Black	Powertrain Control Module***
Clutch Bypass Wire:
Notes:	* This Is A Single Wire System. Parking Lights Need To See A Ground (-) Through A 330 Ohm Resistor. Headlights Need To See A Ground (-) Through A 700 Ohm Resistor. Diesel Vehicles - ORANGE / Black Wait to Start; Tach Wire Is Gray/Black. Both Wires Are Located In A Black Connector Center Top Of Fire Wall. There Are Two Black Connectors, The Correct One Does Not Have A White Insert. * Tach can also be located at pin 74 behind instrument cluster.

Dodge

Ram Pickup

2002-2004

Alarm and Keyless Entry Wiring Colors and Notes
Function	Vehicle Color	Location
Constant +12 Volts:	PINK/BLACK	IGNITION SWITCH HARNESS
Starter Kill:	YELLOW	IGNITION SWITCH HARNESS
Ignition +12 Volts:	BLUE (16 AWG)	IGNITION SWITCH HARNESS
Dome Lights/Superv:	SEE NOTE ***
OEM Horn:	BLACK/ RED (-)	STEERING COLUMN HARNESS
Power Lock:	WHITE/ GREEN	DRIVER'S KICK PANEL ****
Power Unlock:	WHITE/ GREEN	DRIVER'S KICK PANEL ****
Trunk Release:	N/A
Alarm Input Wire:	SEE NOTE ***
Notes:	* Separate Triggers For Each Door. The Driver's Door Trigger Is Tan (-). The Left Rear Door Trigger Is Tan/Orange (-). Both Wires Can Be Found In The Driver's Kick Panel. The Passenger Front Door Trigger Is Tan/Red (-) And the Passenger Rear Door Trigger Is Tan / YELLOW (-). Both Of These Wires Can Be Found In The Passenger Kick Panel. Diode Isolate Each Wire For Alarm Trigger With The Bands Facing Away From The Alarm/Remote Start Module. Use Only One Trigger For Dome Light Supervision. Single Wire Door Lock System See Note #211. Lock Requires A Ground (-) Pulse Through A 867 Ohm Resistor. Unlock Requires A Ground (-) Pulse Through A 364 Ohm Resistor. Diode Isolate One Of The Wires. *** Requires A Negative Pulse Through A 1.5 K-Ohm Resistor.

HERE IS A DIAGRAM FOR YOUR LOCKS

http://bulldogsecurity.com/New%20Wires/New%20Wires/Wires/images/dodram02locks.htm

"Big" Mike

Double Take

Fremont, Ne

remember to check all your wires with a dmm not a test light!!

i take no responsibilty whatsoever for the vailidty of the info nor consequences thereof

osokrayzay

Copper - Posts: 54

Joined: April 01, 2004

Location: United States

Posted: April 22, 2004 at 7:03 PM / IP Logged

Hey guys thanks alot. You guys just saved me $300. Will be donating $$$ to the12volt. Great resource site and guys are willing to help instead of those i know it all and your wasting my time kind of fellas on other forums.

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 22, 2004 at 7:06 PM / IP Logged

so, whats teh result? all go?

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

osokrayzay

Copper - Posts: 54

Joined: April 01, 2004

Location: United States

Posted: April 22, 2004 at 7:17 PM / IP Logged

Radio Shack here does'nt carry any resistors in the 800-900 range. The electronic supply store closed at 5:00 so i have to wait till tommorrow to get those resistors.

osokrayzay

Copper - Posts: 54

Joined: April 01, 2004

Location: United States

Posted: April 22, 2004 at 7:27 PM / IP Logged

The door lock harness is a 3 pin connector.

1. Green (-)Lock (+)unlock output

2. Empty

3. Blue (+)Lock (-)unlock ouput

Which wire do i use?

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: April 22, 2004 at 8:15 PM / IP Logged

look at the only polarity you need and block out the other one.

like here youll need just the neg polarity so green=lock and blue=unlock

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.