the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Ford Excursion Alarm/Remote Start Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
shylatino 
Member - Posts: 1
Member spacespace
Joined: April 19, 2004
Location: United States
Posted: April 24, 2004 at 1:30 PM / IP Logged  
DOES ANY BODY HAVE A WIRING DIAGRAM FOR A  ford 2001 excursion not just for the radio but the whole system i need to install a avicn1 thats needs to plug into the vss wire and the reverse lights would like to know here the wires are inside the cabin
boomer_106 
Silver - Posts: 710
Silver spacespace
Joined: November 25, 2003
Location: United States
Posted: April 24, 2004 at 11:21 PM / IP Logged  

Ford

Excursion

2000-2002

Remote Starter  Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Start:

 

RED / BLUE

IGNITION SWITCH HARNESS *

Ignition  #1:

 

RED / BLACK (THICK)

IGNITION SWITCH HARNESS

Ignition #2:

 

GRAY / YELLOW

IGNITION SWITCH HARNESS

Ignition  #3:

 

RED / BLK (THINNER)

IGNITION SWITCH HARNESS***

Accessory:

 

BLACK/ LT. GREEN

IGNITION SWITCH HARNESS

Brake  Light:

 

LT. GREEN

AT SWITCH ABOVE BRAKE PEDAL

Tach  Signal:

 

WHITE/ PINK

AT BACK OF INSTRUMENT PANEL

Parking Lights:

 

BROWN

AT LIGHT SWITCH

Headlights:

 

OEM Alarm  Disarm:

 

DK. GREEN/ PURPLE (-)

IN DRIVER'S KICK PANEL

OEM Alarm  Arm:

 

ARMS WHEN VEHICLE IS

LOCKED WITH DR. DOOR OPEN

Diesel  Glow Plug:

 

BLACK/ PINK

AT BACK OF INSTRUMENT PANEL

Clutch  Bypass Wire:

 

Notes:

 * This Vehicle May Be Equipped With Ford's PATS Anti-Theft System. See Installation Note #144 - Bypassing Transponder Theft Systems.*** Igntion 3 from the remote start will power both the relay (for the vehicle's ign3) and the bypass module. No Diode Isolation is needed. All DesignTech remote starters except the 2xx22 have an ignition 3 as a WHITE/ black in the control harness.

Ford

Excursion

2000-2002

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

YELLOW/LT. GREEN/ PURPLE

IGNITION SWITCH HARNESS

Starter  Kill:

 

RED / BLUE

IGNITION SWITCH HARNESS *

Ignition  +12 Volts:

 

RED / BLACK (THICK)

IGNITION SWITCH HARNESS

Dome  Lights/Superv:

 

BLACK/ LT. BLUE (-)

IN DRIVER'S KICK PANEL

OEM Horn:

 

YELLOW /GREEN (-)

IN AIR BAG HARNESS

Power  Lock:

 

PINK / YELLOW

Passenger Kick Panel**

Power  Unlock:

 

PINK/GREEN

Passenger Kick Panel**

Trunk  Release:

 

N/A

Alarm  Input Wire:

 

BLACK/ LT. BLUE (-)

IN DRIVER'S KICK PANEL

Notes:

** Wires may be positive, negative, or reverse polarity. Must Test! See Note# 201, Note #202, and Note #203

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, June 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer