’99 intrepid alarm/remote start

i have a dodge intrepid with the single lock/unlock wire, can anyone tell me how to wire the relays for this

thanks

what year is your interpid.

lock relay:

87 - 12v

85 - (-) lock from keyless

86 - 12v

30 - to WHITE/ green w/ a 2.7k ohm resistor

Unlock relay:

87 - 12v

85 - (-) unlock from keyless

86 - 12v

30 - to  WHITE/ green w/ a 620 ohm resistor.

i've got a 99' dodge intrepid and i'm having trouble with the door locks, it's a single wire lock/unlock system, which needs 2.7k ohms for lock and 620 for unlock. i've got all that wired in plus the relays, nows here is the problem the doors unlock when i arm and disarm the alarm, i can fell the relays clicking sepreately one for arm and one for disarm and i tested to see if they are sending out negative pulses and they are. so i'm wondering if a stronger negative pulse on the lock wire would make the doors lock? also if anyone has a door lock diagram for the single wire relay  setup. the alarm is a carbine 2 way fm pager. this is the relay setup that came with the alarm:

there's 3 wires coming from alarm: green (lock), red(12v relays), blue(lock)

relay 1

85 to blue wire from alarm

86 to red wire from alarm

87 to 12volts

30 to unlock wire with 620 ohm

relay 2

85 to green wire from alarm

86 to red wire from alarm

87 to 12volts

30 to lock wire with 2.7k ohm

thanks in advance!