’99 intrepid alarm/remote start

Home / the12volt's Install Bay / Car Security and Convenience / ’99 intrepid alarm/remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 04, 2004 at 5:41 PM / IP Logged

With a meter.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: June 04, 2004 at 6:07 PM / IP Logged

Power Lock WHITE/ D GREEN 16 PIN CONN. IN ACCESS HOLE ** #217

Power Unlock SINGEL WIRE SYSTEM IN DRIVER KICK OR HIGH IN DR. KICK

**Doorlocks Require +12v Pulse Thru 2.7k Ohm Risitor For Lock And +12v Pulse Thru 620 ohm Resistor For Unlock Wire Color Is WHITE/ DARK GREEN

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Sps70129

Copper - Posts: 55

Joined: September 26, 2003

Location: United States

Posted: June 04, 2004 at 6:45 PM / IP Logged

lol, i got that part, but exactly how with a meter

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: June 04, 2004 at 7:05 PM / IP Logged

set it to the ohm area or the omega, greek letter.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

Sps70129

Copper - Posts: 55

Joined: September 26, 2003

Location: United States

Posted: June 04, 2004 at 7:08 PM / IP Logged

thanks profuse007, now should it read what the resistor or something else?

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: June 04, 2004 at 7:48 PM / IP Logged

It will tell you what the value of resistance that the resistor is. If it is more then 10 percent off what you need or it should be then find another resistor. When you do this make sure that only one hand at most is touching any part of the resistor or you will get the resistance of your body messing the reading up.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Sps70129

Copper - Posts: 55

Joined: September 26, 2003

Location: United States

Posted: June 04, 2004 at 8:09 PM / IP Logged

thanks

Sps70129

Copper - Posts: 55

Joined: September 26, 2003

Location: United States

Posted: June 07, 2004 at 1:07 PM / IP Logged

i've got a 99' dodge intrepid and i used the diagram from this site to wire the module and it didn't work, every wire is the same as the diagram except there's a pink(to accessery wire) on it. i used the starter kill wire to activate it. does anyone have any ideas on what the problem could be?

thanks

Sps70129

Copper - Posts: 55

Joined: September 26, 2003

Location: United States

Posted: June 07, 2004 at 2:14 PM / IP Logged

it's a window module

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

’99 intrepid alarm/remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.