Front parking lights/signals won't flash

Cool, worked out great. Thanks, I appreciate the help.

If it's not one thing it's another. Although the alarm and all the functions related to it work fine, the turn signals are acting a bit strange. I disconnected the alarm and all the wiring related to the parking/turn signal circuit, and it still acted up. The deal is that when only the parking lights are on, the front right turn signal doesn't flash. The left one does, as do both rears, but not the front right. When the headlights are on, the front right flashes very dimly, but when the lights are off completely, it flashes brightly.  I checked the bulbs, flasher unit, and rechecked all of my wiring, so I think the problem was present before I started the install, I just didn't notice it. Any ideas as to what might be causing this?

If I might suggest using a higher amperage diode as the current draw of the parking lights will be higher than the 1 amp that the IN4001's are rated at. Try to find at least 10 amp diodes and if you have no luck you can isolate the two systems using relays....good luckall4leisure