distribution block question

Home / the12volt's Install Bay / Car Audio / distribution block question (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

raptor333

Member - Posts: 46

Joined: June 15, 2004

Location: Albania

Posted: July 02, 2004 at 10:26 AM / IP Logged

I have a rockford fosgate distro, and it has one o gauge and 1 4 gauge on one side and 4 4 gauge on the other side. What i wan to do is use the 0 gauge and three of the 4 gauge on the other side. It has 4 slots for fuses can i have 3 fuses on the 0 gauge.

Back to Top

raptor333

Member - Posts: 46

Joined: June 15, 2004

Location: Albania

Posted: July 02, 2004 at 10:29 AM / IP Logged

Or do you think I should just buy a new one that only has one 0 gauge and 4 4 gauge, but no fuses. If you do, do I need to put a fuse in beetween each power wire and amp?

Back to Top

kfr01

Gold - Posts: 2,121

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 30, 2003

Posted: July 02, 2004 at 12:23 PM / IP Logged

The 0 gauge will be coming in from the battery. Since you have 3 amps, 3 of the fused 4 gauge slots should be use. You should put a fuse of appropriate size between each power wire and amplifier. See this page: http://www.bcae1.com/fuses.htm for a tutorial.

New Project: 2003 Pathfinder

Back to Top

raptor333

Member - Posts: 46

Joined: June 15, 2004

Location: Albania

Posted: July 02, 2004 at 12:40 PM / IP Logged

Thank you that helps a lot

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

distribution block question

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.