how is this setup?

Home / the12volt's Install Bay / Car Audio / how is this setup? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

Smoked Jesus

Member - Posts: 10

Joined: July 02, 2004

Posted: July 03, 2004 at 10:56 PM / IP Logged

DYohn wrote:

The Infinity Kappa Perfect 10.1 is rated at a maximum of 350 watts RMS. That amp looks like the Kenwood KAC 7201, which is rated at 230 watts X2 into 2 ohms stereo, or 460 watts RMS when bridged into 4-ohms mono. It actually puts out much less at normal car voltage levels, probably closer to 350 watts than 460. So as long as you are running the sub at 4-ohms you can bridged the amplifier and since Infinity tends to underrate a bit, you should be OK. When you get a second sub you may be in trouble unless you can keep your ohm load at 4-ohms or higher. And by the way, the "1400" and "800" watt numbers you are tossing around are peak ratings and have no real value in the real world.

thanks alot!

i now understand that these companies use these wattage terms only to sell the audio gear....so do u think i might as well just use this one sub?

Back to Top

stevdart

Platinum - Posts: 5,816

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member consistently provides reliable information

Joined: January 24, 2004

Location: Pennsylvania, United States

Posted: July 03, 2004 at 11:28 PM / IP Logged

Yes, one good sub set up with the right power will rock that truck.

Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Back to Top

kfr01

Gold - Posts: 2,121

Joined: April 30, 2003

Posted: July 05, 2004 at 3:10 PM / IP Logged

One sub is more than enough to add a little bass. My single 10" gets louder than I want to listen to.

New Project: 2003 Pathfinder

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

how is this setup?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.