Wiring shock sensor to 2003 Accord alarm

Home / the12volt's Install Bay / Car Security and Convenience / Wiring shock sensor to 2003 Accord alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

docfnky

Member - Posts: 13

Joined: January 20, 2003

Location: United States

Posted: August 04, 2004 at 2:53 PM / IP Logged

Hey i have a 2003 accord with the factory alarm and i want to install a Karr shock sensor to it. Does anyone know of the instruction to install it. I have no clue about the (+) or (-) of the shock sensor. Just know that it's a Karr.

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 04, 2004 at 4:09 PM / IP Logged

do you have a hood switch that will set the alarm off when you open it????

if so, you can use it as your - trigger from the shock....the red will 12 volts and the blk will be ground.

not sure how many wires your shock sensor has.......

three is all you really need....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

hn331

Member - Posts: 16

Joined: April 18, 2004

Location: United States

Posted: August 05, 2004 at 12:09 AM / IP Logged

the other wire is green. the trigger wire!!! I used to work for karr!

Always More To Learn!!!

Back to Top

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: August 05, 2004 at 12:40 AM / IP Logged

ok u lost me now.....

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Back to Top

spokman

Copper - Posts: 75

Joined: June 19, 2004

Location: United States

Posted: August 05, 2004 at 12:48 AM / IP Logged

Another person asked this about a different car. Don't forget a relay to disable the sensor or it will show door ajar when you are going down the road.

Back to Top

youngblood

Copper - Posts: 77

Joined: September 22, 2003

Location: United States

Posted: September 02, 2004 at 8:40 AM / IP Logged

draasch was putting you on the right direction. You need to trigger the factory alarm via the hoodpin wire. AND.... which Karr shock do you have... LX-1?

Back to Top

docfnky

Member - Posts: 13

Joined: January 20, 2003

Location: United States

Posted: September 02, 2004 at 4:39 PM / IP Logged

yeah i have the lx-1

Back to Top

JWorm

Platinum - Posts: 2,208

Joined: December 11, 2002

Location: New Hampshire, United States

Posted: September 02, 2004 at 9:00 PM / IP Logged

Connect the ground wire from the shock sensor to a true ignition wire. Then it will only operate when the car is off.

Back to Top

youngblood

Copper - Posts: 77

Joined: September 22, 2003

Location: United States

Posted: September 06, 2004 at 9:01 PM / IP Logged

I would ONLY do that with a diode. Also... You may want to make sure you don't hook it up to a door circuit unless you want to be sitting in your car... minding your own business... only to see the dome light come on every time you move.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Wiring shock sensor to 2003 Accord alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.