Clifford rsx3.5

Home / the12volt's Install Bay / Car Security and Convenience / Clifford rsx3.5 (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 07, 2004 at 11:24 AM / IP Logged

parvo99 wrote:

Hey, if I don't use the relay, can I use it as my trunk release relay???

i would stick to single relay for simplicity.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

mcse74

Member - Posts: 6

Joined: August 05, 2004

Location: United States

Posted: August 08, 2004 at 2:13 AM / IP Logged

I have done two of these and I cut that relay off and use the blue and green wires to trigger a set of relays and then use the relays to lock and unlock the doors. I tried it without the relays the first time and it did work.

Jim

lilboi

Copper - Posts: 126

Joined: May 01, 2004

Location: United States

Posted: August 08, 2004 at 2:20 AM / IP Logged

Is it a special relay? it looks a bit more advanced. Any one know how to limit the amount of time it cranks before giving up.

lilboi

Copper - Posts: 126

Joined: May 01, 2004

Location: United States

Posted: August 08, 2004 at 8:20 PM / IP Logged

any one know how to do this?

lilboi

Copper - Posts: 126

Joined: May 01, 2004

Location: United States

Posted: August 09, 2004 at 9:21 PM / IP Logged

I have two questions, Today i pushed the 4 buttons on the remote at once (to set the vibration and illumnation). I tried to press the trunk button and on the lcd it cycled through trunk/hood/both. What is this feature?

Also i bought a mini interior siren, can i just tap it to my regular siren. I plan to upgrade my original siren as well, Is there any thing special about the stock one?

lilboi

Copper - Posts: 126

Joined: May 01, 2004

Location: United States

Posted: August 10, 2004 at 3:28 PM / IP Logged

any one help me? try to hold all 4 buttons on your remote, then press the trunk release. what's that for?

profuse007

Gold - Posts: 2,015

Joined: October 20, 2002

Location: Texas, United States

Posted: August 10, 2004 at 3:35 PM / IP Logged

turn on and off trunk hood paging mode?

the user manual saids it all.

Houston,TX

"The two most common elements in the universe are H+ and stupidity" (Ellison).

lilboi

Copper - Posts: 126

Joined: May 01, 2004

Location: United States

Posted: August 10, 2004 at 3:37 PM / IP Logged

i don't get it? I got scared so i kept it in the programming mode, and pulled the battery so it won't register. I didn't change any of the settings so i should be good.

lilboi

Copper - Posts: 126

Joined: May 01, 2004

Location: United States

Posted: August 12, 2004 at 8:22 PM / IP Logged

can you help me find it? i don't know where it is. Also i need to know if i can set my auto start to only try for 2 seconds max.

SoCalBluetooth

Member - Posts: 27

Joined: July 08, 2004

Location: United States

Posted: August 13, 2004 at 9:20 PM / IP Logged

If you had a BitWriter you could take care of all your programming needs very easily. Will work on my different DEI systems for under $100. Counting chirps is for the birds!

Search for other posts by SoCalBluetooth

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.