98 civic Viper 300 install

Home / the12volt's Install Bay / Car Security and Convenience / 98 civic Viper 300 install (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

dBDevil

Copper - Posts: 38

Joined: August 12, 2004

Location: United States

Posted: August 14, 2004 at 11:49 PM / IP Logged

tbirdman74 wrote:

Check the Yellow wire from the alarm, It sounds like it might be hooked up to an ignition wire that loses power during crank. Just test it with multimeter in the off, acc, run, and crank steps of the key. It should always have power during run and crank and not lose it in between the two. Second, double check your grounds to make sure they aren't losing ground during crank. Sounds weird but it can happen. Better yet ground directly to bare metal under dash, then there is no question. Hope it all comes together for you.

I agree. Sounds like you've got the alarm's ignition wire on the acc wire.

civichatch

Member - Posts: 9

Joined: February 26, 2004

Location: Canada

Posted: August 15, 2004 at 12:33 PM / IP Logged

Everything is fine now ! It was my ground wire losing it's ground when the key was in the start position. Grounded everything to the body and everything works perfectly !

Thanks for all the help guys very much appreciated !

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 civic Viper 300 install

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.