Electroluminescent stuff

In Alpines project Mini Cooper V2 they mention something about electoluminescent strips or something (you can see it glowing in places on the dash). Has any of ya'll heard of or used this stuff ??Fortune: You will continue to take chances, and be glad you did.

no, but it sounds interesting for some reson"Shiny chrome when used in conjunction with bikini models is particularly effective in inducing brain deficit disorder"

02 Jeep Grand Cherokee

Monster System on its way.

It looked freakin awesome, they used it in blue and its thats really nice like light glow. It is almost like the tape thats glows when exposed to a black light cept its powered.Fortune: You will continue to take chances, and be glad you did.

I found it, this stuff is freakin awesome. http://www.beingseen.com/Fortune: You will continue to take chances, and be glad you did.

It's a power neon striping. I think Farad makes it and can be purchased online or at a specialty shop. Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

street glow makes a neon wire that would probably be similar

beeing seen makes some good kits. EL lighting does work really well but is not as bright as neon or LEDs. it is a dull glow. it is a very consistant glow over the entire piece and can be cut in almost any shape. just make sure you get the 12 volt power supply. it is pretty small and you have to do all the wiring to the EL sheet if you get it from beingseen. but you can call up and talk to ED if you have any questions. he will walk you thru it. there are other places to get it from that are a little cheaper, but some have big as# transformers or limitations with the wiring.

Awesome, thanks audiomech for the info. Yeah I realize that it isnt that bright but i was looking for sometin that would just kinda glow but not put off that much light so it works perfect for what im gunna use it for.Fortune: You will continue to take chances, and be glad you did.

it like the guage overlays you can but when the guages are turned almost all the way down.

use the pad from a Varad Electric Decal...... i have used about four of the square ones side by side to illuminate a club name on the bottom of a back windsheild.....