door panels?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / door panels? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jmartinez

Member - Posts: 15

Joined: August 18, 2004

Location: United States

Posted: August 20, 2004 at 12:25 AM / IP Logged

Ok heres the deal... im a rookie fabricator... done some stuff to my S-10... pics posted.... right now i am currently on the doors.... as it is door panels for some reason are always tricky... my proplem is that i have no ideas.... im shot... basically if anyone has any shots of any wicked door panels that they like to share and some advice on doing doors please help me out....

here is my first try at something... my dash....

and here are my crossover mounts for my 6.5's and tweeters that are in the doors....

jmartinez

Member - Posts: 15

Joined: August 18, 2004

Location: United States

Posted: August 20, 2004 at 12:36 AM / IP Logged

oh hey sorry but by the way... im not looking to steal anybody's ideas... or copy their stuff.... that would be the ultimate sin... I just need a little motivation to get my mind going.....

-thanks

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: August 20, 2004 at 7:45 AM / IP Logged

Go to Cardomain.com and go through all the audio set ups of other peoples vehicles. Endless ideas for you. You can integrate various different aspects from other peoples installs for your own.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

vdubmk4

Copper - Posts: 175

Joined: August 04, 2004

Location: United States

Posted: August 20, 2004 at 11:08 AM / IP Logged

For ideas and mainly tips go and check out some of the factory cars by Alpine and JL Audio, they have pics that show the whole install process and have little paragraphs written up about each picture of what they are doing. Good luck.

Fortune: You will continue to take chances, and be glad you did.

jmartinez

Member - Posts: 15

Joined: August 18, 2004

Location: United States

Posted: August 21, 2004 at 1:24 AM / IP Logged

Hey Folks... Started my door panles today... never found any inspiration anywhere but just started cutting some boards and ended up goin with what you see here... not much to look at yet... early stages and all but hopefully itll work out nicely....

door panels? -- posted image.

well that at the end of today... hopefully i can finish up the framing and get some glass on it tommorrow though....

-J

defective

Silver - Posts: 642

Joined: August 20, 2003

Location: Canada

Posted: August 21, 2004 at 1:38 PM / IP Logged

like the nice plug work man.... also watch that window crank spacing, the crank might contact the panel near the tweet or mid, looks close from the pics. Also how are you gonna plug with near the handle?

anyway looks sick. Post when you get more pics.

vdubmk4

Copper - Posts: 175

Joined: August 04, 2004

Location: United States

Posted: August 21, 2004 at 2:37 PM / IP Logged

Wow, nice work, i can already see it commin together, mmmm.

Fortune: You will continue to take chances, and be glad you did.

jmartinez

Member - Posts: 15

Joined: August 18, 2004

Location: United States

Posted: August 21, 2004 at 11:42 PM / IP Logged

Heres todays work... i didnt get a whole lot done today.... its started raining on me out of now where... i managed to get resin on one door though... and half on the other.... its hard to tell whats goin on in the pic with the resin... but here they are non the less....

door panels? -- posted image.

Thats today... well see how tomorrow goes.....

r0yal

Copper - Posts: 72

Joined: July 19, 2004

Location: Canada

Posted: August 21, 2004 at 11:52 PM / IP Logged

OooO, Its good to see you have faith in yourself, just to rip your door panels apart... lol... whenever I do a project, I ALWAYS find some used ones, and work from there. haha... lookin good so far tho..

jmartinez

Member - Posts: 15

Joined: August 18, 2004

Location: United States

Posted: August 22, 2004 at 12:31 AM / IP Logged

oh yeah..... its not that i didnt think to get spares... i was already at the junk yard pullin em off a wrecked s-10... but then i though to myself... na.... it just give me a way to back out of the project... so i walked empty handed... plus... i wasnt gonna do that much work to them... but i got "jigsaw happy" so to speak...

-J

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.