the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Dodge Ram 3500 Radio Wiring


Post ReplyPost New Topic
< Prev Topic Next Topic >
mdlnor 
Member - Posts: 4
Member spacespace
Joined: June 15, 2003
Location: United Kingdom
Posted: September 29, 2004 at 6:03 PM / IP Logged  
Can anyone give the wiring diagram for the radio connector for the 2004 dodge ram,  It is not the infinity radio just the regular 4 speaker system.
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: September 29, 2004 at 6:29 PM / IP Logged  
DIRECTWIRE™ WIRING INFORMATION - DODGE / RAM PICKUP / 2004 / Audio
Radio 12v gray/red   +   radio harness
Radio Ground black & BLACK/ lt. green   -   radio harness
Radio Ignition pink / YELLOW   +   radio harness
Radio Illumination ORANGE / tan (dimmer)   +   radio harness
Factory Amp Turn-on dk. green   +   radio harness
Power Antenna N/A       
LF Speaker +/- GREEN/ YELLOW - GREEN/ lt. blue   +,- radio harness or amplifier
Notes: The amplifier is behind the glove box.
RF Speaker +/- gray / YELLOW - gray/lt. blue   +,- radio harness or amplifier
LR Speaker +/- gray/lt. green - gray/green   +,- radio harness or amplifier
RR Speaker +/- GREEN/ lt. green - GREEN/ gray   +,- radio harness or amplifier
Immobilizer Bypass Module: Required: Yes Type: Sentry Key Part #: 555C, 556U, or 555U
Notes: Only vehicles with gray keys have the immobilizer.
Please let me know if this is the correct vehicle. If not I will repost the information.
Regards
EVIL Teken . . .
mdlnor 
Member - Posts: 4
Member spacespace
Joined: June 15, 2003
Location: United Kingdom
Posted: September 29, 2004 at 6:37 PM / IP Logged  
Awesome!!!!!!!!, Now I can install my system, I will check it with the wires in back of the radio. It looks like the correct 1. thank you
swamprat323 
Gold - Posts: 1,333
Gold spacespace
Joined: September 22, 2002
Location: Florida, United States
Posted: September 29, 2004 at 8:06 PM / IP Logged  
Get a harness, dont cut it off and then tie into the wires, harness also saves time.
mdlnor 
Member - Posts: 4
Member spacespace
Joined: June 15, 2003
Location: United Kingdom
Posted: September 30, 2004 at 10:01 PM / IP Logged  

I am just adding a line converter so I can run RCAs to my eq, then to my amps

monster57 
Member - Posts: 3
Member spacespace
Joined: August 20, 2004
Posted: November 29, 2004 at 10:33 AM / IP Logged  
i didnt see the factory amp behind the glove box

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, January 30, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer