DEI 555f problems

Home / the12volt's Install Bay / Car Security and Convenience / DEI 555f problems (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

boston1918

Member - Posts: 8

Joined: October 16, 2004

Location: American Samoa

Posted: October 17, 2004 at 12:52 PM / IP Logged

mo12v wrote:

Well, U could put your hand on it to feel the "click" or meter it

How long after U "program it" can U Remote Start the vehicle?

Will it Remote Start "1 time" after 20 minutes or will it Remote Start "1 time" after you start vehicle with Key , turn off and Remove key and wait 10 or so minutes?

Hope I'm not rattling your brain.......

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 17, 2004 at 3:20 PM / IP Logged

That's the trouble with posting, understanding everybody:
<<<It only works the time I program it, it doesn't work after that. After taking the 2 keys out and putting the capsule in front it starts that time only. One minute or 4 days after doesn't make a difference, it only works when programming it.>>>
Reading this tells me U are trying to program 555 and then putting capsule next to cylinder
The capsule should be mounted first, then programming should be done
MO

Don't Learn from Others Mistakes
You Might Be the One That Knows.

Back to Top

boston1918

Member - Posts: 8

Joined: October 16, 2004

Location: American Samoa

Posted: October 18, 2004 at 1:27 AM / IP Logged

The capsule is already mounted, I said it that way so that you would know it was during programming that it works, and not after. I programmed it by holding it, and I have tried with it already mounted and the results are the same. Do you have any idea what is wrong? The capsule is learning the code at least one time to make it start, but it is not holding it/

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

Joined: September 30, 2003

Location: Afghanistan

Posted: October 18, 2004 at 8:29 AM / IP Logged

Assuming that U have the 12 volt wire to Constant 12 volts and the Trigger wire to Negative Output while running from RS. And U have programmed according to directions

Next option would be to replace 555

I have seen these units NOT work with some Fords

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

boston1918

Member - Posts: 8

Joined: October 16, 2004

Location: American Samoa

Posted: October 18, 2004 at 2:08 PM / IP Logged

It has to be wired right, because it already worked before, it just stopped working. And since it worked before then it's not an issue of the 555f not working with my model vehicle.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

DEI 555f problems

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.