03 sierra

Home / the12volt's Install Bay / Car Security and Convenience / 03 sierra (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

sparkie

Platinum - Posts: 2,061

Joined: November 06, 2003

Location: Canada

Posted: October 20, 2004 at 2:54 PM / IP Logged

Check the programming for the Prostart. Most of them don't pulse the disarm wire with default programming. You should program all modes and functions when these remote starters are used. Don't forget to program the tach too. Confirm that you have also tapped into the correct wire inside the drivers door for the disarm circuit. I would suggest that you purchase a keyless/alarm data interface for this truck. They are worth the money and conveniece. They hook up with only a few wires inside the dash and control the locks and factory alarm.

sparky

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 sierra

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.