Aladdin 2000 problem! Please help! jeff??

ground sensitive huh? i umm actually took out my antenna to extend it out, resoldered everything and put the antenna between the roof and the lining.. man.... great.. that means my module is dead huh?

i even took out the LED and extended it to my dash so people can actually see the alarm light....

btw i tried the programming button both ways..ignition on and off... i think it's dead..only thing it does is that the LED lights up constantly when keys are on ACC...

you think i can still send it back with all the modifications i did to it?

thanks for your help!

You can try to return the communication module even though it has been altered. It's the discretion of the manufacturer on wether you receive any warranty on the module or not. Nothing to loose and if they do charge you for one, they'll call you to let you know this.

No problem... let me know how it works out for you.

sorry jeff.... i have a new problem hehe..

i think my communication module decided to work now.. because when i press the red button the alarm brain beeps and beeps... i tried going through the procedure of getting out of the valet mode but it didn't do anything after the beeping.

before when i disconnect the battery to my alarm then plug it back in, it usually give one beep to ARM out of the siren.. but now when i unplug and plug it gives two beep instead one.. i can't figure out anything....

thanks for your help again!!

When you enter and exit valet.... make sure that the PINK P10 wire is in fact turnng off and on with the ACCESSORY wire.