deck wont come out?

Home / the12volt's Install Bay / Car Audio / deck wont come out? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

cache

Member - Posts: 37

Joined: February 19, 2004

Location: United States

Posted: October 31, 2004 at 8:44 PM / IP Logged

I was tryin to get the stock deck out of my boss's 1995 ford f250 powerstroke. but it wont come out. i put the DIN tools in and took part of the dash off to pull on it but it wont move. is there some bolts or something in there holding it or what? pictures would help me too if you have any. thanks

audiobass10

Silver - Posts: 328

Joined: October 11, 2004

Location: United States

Posted: October 31, 2004 at 8:52 PM / IP Logged

Just take a hammer and bash the damn thing out..that's my suggestion.

Dave

Pioneer Premier DEH-P660

15" Kicker CVR

Profile AP1000M

It's Loud

jeffchilcott

Platinum - Posts: 2,483

Joined: April 11, 2002

Location: United States

Posted: October 31, 2004 at 8:53 PM / IP Logged

if it has the din tool you need to put them in and push them outward of each other this should pop the clips holding it in

2009 0-1000 Trunk WR 154.0DB 2009 1001+ Trunk WR

2007 USACI World Champion

2007 World Record

2006 USACI Finals 2nd Place

cache

Member - Posts: 37

Joined: February 19, 2004

Location: United States

Posted: October 31, 2004 at 9:03 PM / IP Logged

actually i just made the DIN tools with some wire.

Audiobass10, i was just about to the point(since the stupid deck doesnt work anyway), but i didnt think my boss would like that too much.

12v.boogie

Member - Posts: 11

Joined: October 29, 2004

Location: United States

Posted: October 31, 2004 at 9:23 PM / IP Logged

get the real tools and hope you didnt spring the clips. if this dont work buy a hacksaw

sk8ingsmurf

Copper - Posts: 198

Joined: March 18, 2004

Location: United States

Posted: October 31, 2004 at 10:46 PM / IP Logged

yeah Ive done the wire way before, gotten it to work once, however Ive tried it about 20 other times with no luck, I would recommend going to walmart and buying the ford radio removal keys, in a family of 5 fords this has been the best $3 I have ever spent, they work so much better than the clothes hanger.

Asmodeus

Silver - Posts: 393

Joined: September 02, 2004

Location: United States

Posted: November 01, 2004 at 12:16 AM / IP Logged

I never have used those keys...I have four of the smaller Precision scredrivers and I use them...The beveled head makes it easy to get behind the locks...Just my opinion..

Buy the keys though..Would be a good idea

Making the World A Louder Place

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: November 01, 2004 at 12:20 AM / IP Logged

The proper keys will give you less headaches. But, make sure that your key is not going around the clip and make sure that you stop when you feel some pressure on the wire. Then pull outward on the wire and pull using the tape deck, hopefully you have this.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

cache

Member - Posts: 37

Joined: February 19, 2004

Location: United States

Posted: November 01, 2004 at 8:28 AM / IP Logged

on my way to malmart. thanks guys

cache

Member - Posts: 37

Joined: February 19, 2004

Location: United States

Posted: November 01, 2004 at 8:29 AM / IP Logged

on my way to walmart. thanks guys

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.