791xv starter signal

Home / the12volt's Install Bay / Car Security and Convenience / 791xv starter signal (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: November 21, 2004 at 10:37 PM / IP Logged

If I set the starter signal for 4 seconds but the engine actually cranks in 1 second, will the sytem stop the starter signal at that point, or will the starter continue energized for another 3seconds?

Back to Top

gcorrea

Silver - Posts: 436

Joined: May 22, 2004

Location: United States

Posted: November 21, 2004 at 10:54 PM / IP Logged

it should stop, thats why it has the tach wire hooked up to it to let it know its running.

gcorrea

Back to Top

davidosand

Member - Posts: 36

Joined: August 04, 2004

Posted: November 23, 2004 at 10:45 PM / IP Logged

But what if I use voltage sensing instead of tach sensing? Will it work the same way?

Back to Top

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: November 23, 2004 at 10:47 PM / IP Logged

I have a dumb question, why not just use tach sensing. I have never tried it the way you are suggesting because it seems completly unnessasary to me.

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

Back to Top

Bnluis

Silver - Posts: 578

Joined: December 24, 2002

Location: New York, United States

Posted: November 23, 2004 at 10:50 PM / IP Logged

if you use Voltage sense it will crank for the set amount of time. if use tach it will crank until car starts. doen't matter hig long is set for. Word of advice go tach, trust me on this one.

Luis

Sound Waves

Is up to the installer to test all wires with a DMM whenever possible.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

791xv starter signal

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.