3 negative pulses from single wire?

Home / the12volt's Install Bay / Car Security and Convenience / 3 negative pulses from single wire? (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

jc9995

Member - Posts: 14

This member has made a donation to the12volt.com. Click here for more info.

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 1:47 PM / IP Logged

I have a 04 dodge ram, which has negative pulse single wire door locks. My remote start needs 3 negative pulses for start. How do I do that? No info I can find tells me how to get a signal FROM a single wire system.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 27, 2004 at 1:54 PM / IP Logged

lets start with the brand of unit you atre installing.......

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 27, 2004 at 1:54 PM / IP Logged

sorry first one had a typo in it

lets start with the brand of unit you are installing.......

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

riceman

Copper - Posts: 109

Joined: October 14, 2004

Posted: November 27, 2004 at 2:33 PM / IP Logged

Try using a validity channel and pressing it three times to send three pulses. Most remote starters add/on repuire two pulse but some can be programmed to one pulse . Hopefully that will give u a few ideas.

jc9995

Member - Posts: 14

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 4:24 PM / IP Logged

Crimestopper Model RS-901 viii. I can program 2 or 3 pulses. Once it is wired I can then hit the lock button 2-3 times to trigger the remote start. The problem is I dont know how to get the negative pulse from the single wire door lock system.

johnmax

Copper - Posts: 131

Joined: November 15, 2003

Posted: November 27, 2004 at 4:26 PM / IP Logged

You can set that unit to single pulse input. Don't remember how. It is in the install manual and program menu.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 27, 2004 at 4:27 PM / IP Logged

dont you have two different buttons on your remote????????

the lock button will send the pulse and the wire with the resistor in will know...

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

jc9995

Member - Posts: 14

Joined: November 27, 2004

Location: United States

Posted: November 27, 2004 at 4:27 PM / IP Logged

I have no problem with pulsing three time, BUT I dont know how to extract a negative pulse from a single wire door lock system.

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 27, 2004 at 4:31 PM / IP Logged

just wire up the door locks like you should.......then the lock wire will send the pulse........

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

draasch

Gold - Posts: 2,172

Joined: February 07, 2003

Location: Florida, United States

Posted: November 27, 2004 at 4:32 PM / IP Logged

Power Lock VIOLET/GREEN DRIVER KICK PANEL ** #217

Power Unlock SINGLE WIRE SYSTEM DRIVER KICK PANEL **

** VIOLET/GREEN Wire Must See Ground Through 887 Ohm Resistor For Lock And Ground Through 280 Ohm Resistor For Unlock

Good Luck

David

Ace Security

813-376-9778

Tampa

Donate to the 12volt

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.