the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

AvantGuard4 Installation Manual Sections?


Post ReplyPost New Topic
< Prev Topic Next Topic >
showngo2000 
Copper - Posts: 61
Copper spacespace
Joined: November 28, 2004
Location: United States
Posted: December 06, 2004 at 9:55 PM / IP Logged  

Hi everyone, a newbie here.  I have a couple of quick questions about installing the Clifford Avantguard4.  I recently found the installation manual for this alarm, but in certain sections, it says things like "Refer to This Section of the binder for more information."  However,  "This" is not in the installation manual that I have.  Some of the sections are:  Door locks, Door trigger and parking lights, and Window roll-up.  Does anybody have these or have access to these?  I know I'm asking alot, but PLEASE help me out.  I've been trying earnestly to find them, and cannot find them anywhere.  Thanks in advance for all of the help.  I really appreciate it.

OmarR 
Copper - Posts: 162
Copper spacespace
Joined: April 02, 2003
Location: Indiana, United States
Posted: December 07, 2004 at 12:08 AM / IP Logged  

The only section you really need is door locks, which i have here:

http://home.san.rr.com/iroc/MISC/doorlock_wiring.pdf

As for door trigger:

Gray Wire - Door Trigger

BROWN / Red - connect to ground if neg door trigger, or connect to 12V constant if positive door trigger.

For Windows:

Left Window - WHITE/ Violet to switch side,  Violet to motor side

Right Window - WHITE/ Orange to switch side, Orange to motor side

I could of been more specific, but  you failed to mention what kind of car this is going into.

showngo2000 
Copper - Posts: 61
Copper spacespace
Joined: November 28, 2004
Location: United States
Posted: December 07, 2004 at 7:43 AM / IP Logged  
Sorry...It's going in a 1999 Ford Contour
showngo2000 
Copper - Posts: 61
Copper spacespace
Joined: November 28, 2004
Location: United States
Posted: December 07, 2004 at 7:43 AM / IP Logged  
Sorry...It's going in a 1999 Ford Contour
showngo2000 
Copper - Posts: 61
Copper spacespace
Joined: November 28, 2004
Location: United States
Posted: December 07, 2004 at 5:46 PM / IP Logged  
So, will my Contour need something to bypass the PATS system?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer