the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Pro Start problems in 1997 Grand am


Post ReplyPost New Topic
< Prev Topic Next Topic >
Bubbabossert 
Member - Posts: 2
Member spacespace
Joined: December 11, 2004
Posted: December 11, 2004 at 4:48 AM / IP Logged  
 Installed pro start in car bought plxr bypass module cant find bulb test wire and will not run.  Problem is the theft system and cant figure out why will not run.  Had wiring diagram for car, showed bulb test wire at pin F and ignition switch but no indication of any signal on that wire.(used logic probe) No power or ground on probe. Think I have keysense wire right any ideas.  Should be passlock 1 because of wire colors at key thanks in advance
seracis 
Member - Posts: 17
Member spacespace
Joined: November 24, 2004
Location: United States
Posted: December 11, 2004 at 5:24 PM / IP Logged  
the bulb test wire is found in the same plug as the red constant wires, on the back of the steering assembly, once you remove the column shroud.  I think it shows ground only while starting.
seracis 
Member - Posts: 17
Member spacespace
Joined: November 24, 2004
Location: United States
Posted: December 11, 2004 at 5:24 PM / IP Logged  
the bulb test wire is found in the same plug as the red constant wires, on the back of the steering assembly, once you remove the column shroud.  I think it shows ground only while starting.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer