Speed Sensor For 2001 Excursion

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Speed Sensor For 2001 Excursion (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Docbuckeye

Member - Posts: 6

Joined: December 29, 2003

Posted: January 19, 2005 at 9:47 PM / IP Logged

I am getting ready to install an avic n-1....I have searched and found that the speed sensor for 2002 excursion is gray\black....is this the same on the 2001? and I have a factory 6 disc in dash unit....I have read that the wire can be found around the radio.....any comments

I am also going to install a truspeed calibrator (due to oversized tires) where do I install this in the speed sensor line?

Thanks

Back to Top

Go4DKil

Member - Posts: 16

Joined: February 11, 2005

Location: United States

Posted: February 21, 2005 at 11:00 PM / IP Logged

I used the gray/black wire located on my factor cruise control unit under the hood on the right side. Pin number 3 is the VSS.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Speed Sensor For 2001 Excursion

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.