Compustar 2WSSR-AS Help

Home / the12volt's Install Bay / Car Security and Convenience / Compustar 2WSSR-AS Help (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 07, 2005 at 12:35 AM / IP Logged

vxtecz wrote:

i bypass the clutch with the status, starter, ign, and acc output to the purple pigtail and clutch wire to the blue wire from the relay that compustar provided.

Please explain what you did with the BLUE wire from the main harness ? This wire is suppose to be for a 2nd IGN or ACC or starter wire, not for the clutch. As far as reservation mode goes, you have to come to a stop in the car ( press the brake pedal ), pull up the hand brake, & then release the foot brake. The lights will flash and remove the key from the ignition switch. Make sure that you do not remove the key until your lights turn on or you hear a relay click from the CPU of the Compustar.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

vxtecz

Member - Posts: 13

Joined: February 04, 2005

Location: United States

Posted: February 07, 2005 at 4:15 AM / IP Logged

Yup that was the problem the foot brake wire was connected to the correct wire... but now when i remote start it... it wont crank.. i can here it try to start but wont crank.

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 07, 2005 at 4:22 AM / IP Logged

Did you use the starter disable relay that the system came with ? Make sure that you wired the proper side of the relay to the starter motor and the key side.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

vxtecz

Member - Posts: 13

Joined: February 04, 2005

Location: United States

Posted: February 07, 2005 at 4:25 AM / IP Logged

i hook up the blue wire to the clutch wire and it blew up my clutch switch... im stuck on what i was suppose to do with the clutch wire?

vxtecz

Member - Posts: 13

Joined: February 04, 2005

Location: United States

Posted: February 07, 2005 at 4:26 AM / IP Logged

soild yellow to the motor side and yellow/black to the key side rite?

vxtecz

Member - Posts: 13

Joined: February 04, 2005

Location: United States

Posted: February 07, 2005 at 4:32 AM / IP Logged

what wire do i suppose to connect the status output (black wire) and starter output (RED / black) my clutch wire is (GREEN/ black)... thanks for helping

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 07, 2005 at 4:38 AM / IP Logged

Did you test the clutch wire to see if it's a (-) or a (+) trigger ? Some Honda's use a (-) and some use the (+). Tst with a DMM. If you want to try this, get inside the car and get into ready mode, now stay in the vehicle and press the clutch in. Try to remote start the vehicle and if it works with the clutch pressed in, then you know that everything works except the clutch bypass. If it doesn't work, then you have other issues with the system.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

vxtecz

Member - Posts: 13

Joined: February 04, 2005

Location: United States

Posted: February 08, 2005 at 3:42 AM / IP Logged

The remote start when i push the clutch... but wont start when clutch not down... so its not starting because my clutch show not sign of bypassed.. hmm do i bypass with the status output wire to the clutch wire or the starter output to the clutch wire?

Velocity Motors

Moderator - Posts: 12,488

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 08, 2005 at 5:43 AM / IP Logged

First you have to find out what system you have for clutch :

http://www.velocitymotorsport.com/images/install_notes/107.jpg

http://www.velocitymotorsport.com/images/install_notes/146.jpg

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

vxtecz

Member - Posts: 13

Joined: February 04, 2005

Location: United States

Posted: February 08, 2005 at 10:01 AM / IP Logged

thanks for helping me

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.