03 Camry anti-grind

Home / the12volt's Install Bay / Relays / 03 Camry anti-grind (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bbattleson

Member - Posts: 7

Joined: February 18, 2005

Location: United States

Posted: February 18, 2005 at 10:43 AM / IP Logged

Hey everyone ...i tried searching but came up with no results.. I put a DEI 562T keyless/Remote start on an 03 Camry 4cyl. auto. The car has no transponder and everything work beautifully except I cant get the anti-grind feature to work. Im guessing it is due to the dual starter wires and i've already tried to relay them putting both keyside wires to 87a, engine side to 30, 87 unused, 85 tapped into 2nd ign, 86 to 12v. Doesnt work.

The starter kill works fine. Any answers are greatly appreciated.

Blake

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: February 18, 2005 at 12:09 PM / IP Logged

Yeah, it wouldn't work if you wired 85 and 86 both to +12V. Wire 85 to ground when armed/orange wire main harness and 86 to true ignition.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

bbattleson

Member - Posts: 7

Joined: February 18, 2005

Location: United States

Posted: February 18, 2005 at 12:15 PM / IP Logged

Thanks Auex....running out to try it. I'll let ya know

Back to Top

bbattleson

Member - Posts: 7

Joined: February 18, 2005

Location: United States

Posted: February 18, 2005 at 12:26 PM / IP Logged

Didnt work. Now I have:

85 - ground when armed

86 - ignition

87a - both start wires (key sides)

30 - both start wires (engine sides)

this didnt work. The car starts with the key but will no longer autostart.

Back to Top

2intrigues

Member - Posts: 8

Joined: December 12, 2004

Location: American Samoa

Posted: February 18, 2005 at 11:06 PM / IP Logged

Is the starter output from the RS connected to the engine side (30) of the anti-grind relay? If not, that's likely your problem.

Back to Top

bbattleson

Member - Posts: 7

Joined: February 18, 2005

Location: United States

Posted: February 19, 2005 at 12:17 AM / IP Logged

It's not connected to 30. I had it as the input on 85 but that wasnt working. So your saying put all three wires...both engine side start wires and the output from the RS to 30?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 Camry anti-grind

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.