93 acura integra diagrams..

anyone have a 93 acura integra alarm install wiring diagrams?  colors one the wires and description?   also..  my 98 accord i have a immobilizer can i install an aftermarket alarm?  do  I need a transponder?  what is it and which wire do you connect it through?  thanks 

|       ITEM      |     WIRE COLOR     |POL|       WIRE LOCATION        |

|              12V|white or wht/blk    |+  |ign harness or fusebox      ||          STARTER|BLACK/ white         |+  |ign harness or fusebox      ||         IGNITION|BLACK / YELLOW        |+  |ign harness or fusebox      ||  SECOND IGNITION|blue/white          |+  |ign harness or fusebox      ||        ACCESSORY|yellow              |+  |ign harness or fusebox      ||       POWER LOCK|GREEN / WHITE         |-  |either kick panel *1        ||     POWER UNLOCK|GREEN/ red           |-  |same                        || PARKING LIGHTS +|RED / green           |   |steering column             ||       HEADLIGHTS|RED / yellow          |+  |steering column             ||     DOOR TRIGGER|GREEN/ red *2        |-  |dr kick panel/fusebox       || DOME SUPERVISION|use door trigger    |   |                            ||  TRUNK/HATCH PIN|GREEN/ black         |-  |dr kick panel/fusebox       ||TRNK/HTCH RELEASE|manual              |   |                            ||       TACHOMETER|blue                |   |distributor                 ||      SPEED SENSE|yellow/red          |   |instrument cluster          ||       BRAKE WIRE|GREEN / WHITE         |+  |brake pedal switch          ||     HORN TRIGGER|blue/red *3         |-  |steering column             ||           WIPERS|blue and blu/yel    |-  |at switch                   ||  LF WINDOW UP/DN|RED / blu - RED / yel   |A  |in drivers door             ||  RF WINDOW UP/DN|blu/grn - blu/yel   |A  |in drivers door or dkp      ||  LR WINDOW UP/DN|green - grn/yel     |A  |in drivers door or dkp      ||  RR WINDOW UP/DN|yel/grn - yellow    |A  |in drivers door or dkp      ||        RADIO 12V|WHITE/ blue          |+  |radio                       ||     RADIO GROUND|black               |-  |radio                       ||     RADIO SWITCH|yellow/red          |+  |radio                       || RADIO ILLUMINATE|RED / black           |+  |radio                       ||    POWER ANTENNA|yellow/white        |+  |radio                       ||       LF SPEAKER|blu/grn - gry/blk   |   |radio                       ||       RF SPEAKER|RED / grn - brn/blk   |   |radio                       ||       LR SPEAKER|blu/yel - gry/wht   |   |radio                       ||       RR SPEAKER|RED / yel - brn/wht   |   |radio                       |

Notes:

*1 Easier to locate at passenger kick panel.  On drivers side, wires are located high in kick panel.*2 Looks like a 14 awg. wire,  but is mostly insulation.*3 High-current ground.  Use a relay when interfacing with this circuit.

wow thanks for the quick reply..   when installing the alarm.  do I have to cut off any wires..  or can i use t-taps for all of them?  

As for the Accord.... you only need a transponder bypass module if you are adding a remote starter to the vehicle. Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA