MDF keeps splitting

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / MDF keeps splitting (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

Wyboy

Member - Posts: 20

Joined: September 05, 2003

Location: United States

Posted: April 02, 2005 at 10:10 PM / IP Logged

Ok, this is a stupid problem to have. I am pre-drilling the holes and the MDF is still splitting. WTF am I doing wrong?

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 02, 2005 at 10:32 PM / IP Logged

Use a larger bit when pre drilling, and use a counter sink.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Drocay

Member - Posts: 21

Joined: May 28, 2004

Location: United States

Posted: April 03, 2005 at 3:19 AM / IP Logged

wut thickness of mdf are u using.

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: April 03, 2005 at 8:58 AM / IP Logged

what kinda screws are you using?

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 03, 2005 at 11:55 AM / IP Logged

What kind of drill are you using?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

rhdAndy

Copper - Posts: 65

Joined: August 02, 2004

Location: United States

Posted: April 03, 2005 at 2:01 PM / IP Logged

what kind of taberl you using, i dont really have a question about what kind of anythings, everyone else took all the choice ones, i have that same problem, i just liquid nail the edges on the outside to fix that problem

ss-installer

Silver - Posts: 444

Joined: February 27, 2005

Location: United States

Posted: April 03, 2005 at 9:01 PM / IP Logged

what kind of shoes do you wear? its all in the shoes.

lilbenny

Copper - Posts: 116

Joined: April 01, 2005

Posted: April 03, 2005 at 10:40 PM / IP Logged

what kind of gloves are you weraing? you need the special MDF edition... helps your wrist movement and gets better flow cuts...

sorry i had to join in on the fun lol :D

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 03, 2005 at 10:40 PM / IP Logged

What kind of computer are you using?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: April 03, 2005 at 10:42 PM / IP Logged

Sorry, we get bored easily.

Also as you can tell we are easily amused,

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.